Template:Fw checksum cli: Difference between revisions

From Teltonika Networks Wiki
No edit summary
No edit summary
Line 1: Line 1:
You can calculate the checksum of a firmware image file using '''md5sum'''. This command should work on most Linux distros or you can upload the firmware into the router and calculate the checksum via a '''[[Command line interfaces|Command line interfaces]]'''.
You can calculate the checksum of a firmware image file using '''md5sum'''. This command should work on most Linux distros or you can upload the firmware into the router and calculate the checksum via a '''[[Command line interfaces|command line interface]]'''.


When you select a firmware image file for upload via the System -> Firmware page, the file gets uploaded into '''''/tmp/''''' directory with the name '''''firmware.img'''''. So the command to calculate the checksum should look like this:
When you select a firmware image file for upload via the System -> Firmware page, the file gets uploaded into '''''/tmp/''''' directory with the name '''''firmware.img'''''. So the command to calculate the checksum should look like this:

Revision as of 07:38, 12 September 2018

You can calculate the checksum of a firmware image file using md5sum. This command should work on most Linux distros or you can upload the firmware into the router and calculate the checksum via a command line interface.

When you select a firmware image file for upload via the System -> Firmware page, the file gets uploaded into /tmp/ directory with the name firmware.img. So the command to calculate the checksum should look like this: