RUT850 Hotspot: Difference between revisions

Revision as of 08:32, 17 December 2018

Main Page > EOL Products > RUT850 > RUT850 Manual > RUT850 WebUI > RUT850 Services section > RUT850 Hotspot

Summary

Wireless Hotspots are essentially Wireless Access Points - they provide network and/or internet access to other Wi-Fi devices. The difference is that Hotspots are a lot more versatile when it comes to managing, monitoring and authenticating the wireless network's users. For example, while Wireless APs can be password protected, with Hotspots you can configure different users with different names, passwords, even data limits and data speeds and more. This chapter is an overview of the Wireless Hotspot function in RUT routers.

General

The General tab is where most of the Hotspot configurations take place. This section will be divided into six sub-sections - one for each Authentication mode, since the chosen Authentication mode will define how the Hotspot will be configured in general.

External Radius

External Radius authentication mode uses an external Radius server, to which you have to provide an address to, instead of using the router's internal Radius server.

field name	value	description
Enable	yes \| no; Default: no	Toggles Wi-Fi Hotspot ON or OFF
AP IP	ip; Default: 192.168.2.254/24	Access Point IP address defines the IP address of your Hotspot's network
Logout address	host \| ip; Default: 1.1.1.1	An address that can be used by users to logout from the Hotspot session
Authentication mode	External radius \| Internal radius \| Without radius \| Advertisement \| MAC auth \| SMS OTP; Default: Without radius	Authentication mode defines how users will connect to the Hotspot
Authentication protocol	PAP \| CHAP; Default: PAP	Authentication protocol used to authenticate new connections on the Hotspot
Terms of service	yes \| no; Default: no	If enabled, users have to agree to the Terms of service before logging in. Custom Terms of service can be defined in the Landing Page section
RADIUS server #1 \| RADIUS server #2	ip; Default: " "	The IP address of the RADIUS server that is to be used for Authenticating your wireless clients
Authentication port	integer [0..65535]; Default: 1812	RADIUS server authentication port
Accounting port	integer [0..65535]; Default: 1813	RADIUS server accounting port
Radius secret key	string; Default: " "	The secret key is a password used for authentication with the RADIUS server
UAM port	integer [0..65535]; Default: 4990	Port to bind for authenticating clients
UAM UI port	integer [0..65535]; Default: 4990	UAM User Interface port
UAM secret	string; Default: " "	Shared secret between the UAM server and the Hotspot
NAS identifier	string; Default: " "	NAS-Identifier is one of the basic RADIUS attributes
Swap octets	yes \| no; Default: no	Swaps the meaning of input octets and output as it relates to RADIUS attributes
Location name	string; Default: " "	Custom location name for your Hotspot
External landing page	yes \| no; Default: no	Enables the use of an external landing page
Protocol	HTTP \| HTTPS; Default: HTTP	Connection protocol of your Hotspot
HTTPS redirect	yes \| no; Default: no	Redirects HTTP pages to landing page
SSL key file	.key file; Default: " "	SSL key file used for authentication. This field becomes visible only if HTTPS redirect is enabled
SSL certificate file	.crt file; Default: " "	SSL certificate file used for authentication. This field becomes visible only if HTTPS redirect is enabled
Use custom DNS	yes \| no; Default: no	Enables the use of custom DNS servers instead of your regular DNS
DNS server 1 \| DNS server 2	ip; Default: " "	Additional DNS servers that are to be used by the Hotspot. These fields become visible only if Use custom DNS is enabled

Internal Radius

Internal Radius is Authentication mode that uses the router's internal RADIUS server for authentication. Teltonika routers' RADIUS server has RFC 2866 RADIUS Accounting and RFC 2869 RADIUS Extensions implemented

field name	value	description
Enable	yes \| no; Default: no	Toggles Wi-Fi Hotspot ON or OFF
AP IP	ip; Default: 192.168.2.254/24	Access Point IP address defines the IP address of your Hotspot's network
Logout address	host \| ip; Default: 1.1.1.1	An address that can be used by users to logout from the Hotspot session
Authentication mode	External radius \| Internal radius \| Without radius \| Advertisement \| MAC auth \| SMS OTP; Default: Without radius	Authentication mode defines how users will connect to the Hotspot
Terms of service	yes \| no; Default: no	If enabled, users have to agree to the Terms of service before logging in. Custom Terms of service can be defined in the Landing Page section
External landing page	yes \| no; Default: no	Enables the use of an external landing page
Protocol	HTTP \| HTTPS; Default: HTTP	Connection protocol of your Hotspot
HTTPS redirect	yes \| no; Default: no	Redirects HTTP pages to landing page
SSL key file	.key file; Default: " "	SSL key file used for authentication. This field becomes visible only if HTTPS redirect is enabled
SSL certificate file	.crt file; Default: " "	SSL certificate file used for authentication. This field becomes visible only if HTTPS redirect is enabled
Use custom DNS	yes \| no; Default: no	Enables the use of custom DNS servers instead of your regular DNS
DNS server 1 \| DNS server 2	ip; Default: " "	Additional DNS servers that are to be used by the Hotspot. These fields become visible only if Use custom DNS is enabled

Information on how to configure Internal radius server can be found here.

Without Radius

Without Radius Authentication doesn't use a Radius server to authenticate users connecting to the Hotspot, instead it gives you the possibility to configure different users with different password and session parameters.

field name	value	description
Enable	yes \| no; Default: no	Toggles Wi-Fi Hotspot ON or OFF
AP IP	ip; Default: 192.168.2.254/24	Access Point IP address defines the IP address of your Hotspot's network
Logout address	host \| ip; Default: 1.1.1.1	An address that can be used by users to logout from the Hotspot session
Authentication mode	External radius \| Internal radius \| Without radius \| Advertisement \| MAC auth \| SMS OTP; Default: Without radius	Authentication mode defines how users will connect to the Hotspot
Terms of service	yes \| no; Default: no	If enabled, users have to agree to the Terms of service before logging in. Custom Terms of service can be defined in the Landing Page section
External landing page	yes \| no; Default: no	Enables the use of an external landing page
Protocol	HTTP \| HTTPS; Default: HTTP	Connection protocol of your Hotspot
HTTPS redirect	yes \| no; Default: no	Redirects HTTP pages to landing page
SSL key file	.key file; Default: " "	SSL key file used for authentication. This field becomes visible only if HTTPS redirect is enabled
SSL certificate file	.crt file; Default: " "	SSL certificate file used for authentication. This field becomes visible only if HTTPS redirect is enabled
Use custom DNS	yes \| no; Default: no	Enables the use of custom DNS servers instead of your regular DNS
DNS server 1 \| DNS server 2	ip; Default: " "	Additional DNS servers that are to be used by the Hotspot. These fields become visible only if Use custom DNS is enabled

Users Configuration

The Users Configuration tab is used to create new, unique users that can connect to the Hotspot.


FIELD NAME	VALUE	DESCRIPTION
Username	string; Default: " "	A custom user name used to authenticate clients connecting to the Hotspot
Password	string; Default: " "	A custom password for the specified user name
Session Template	string; Default: unlimited	Session templates define session settings for different users. The unlimited Session Template is a default template with no restrictions. More on Session Template in the next section

Session Templates

A Session Template is a set of rules that can be prescribed to a Hotspot user. A default template named unlimited is present in the router, but it has no configured restrictions. You can edit the default template or you can create a custom template and configure it.


FIELD NAME	VALUE	DESCRIPTION
Idle timeout	integer; Default: " "	A timeout in seconds after which idle users are automatically disconnected from the Hotspot. 0 means unlimited
Session timeout	integer; Default: " "	A timeout in seconds after users are automatically disconnected from the Hotspot. The timeout countdown begins when a user is authenticated to the Hotspot and, after an amount of time specified in this field, the user gets disconnected from the Hotspot. 0 means unlimited
Download bandwidth	integer; Default: " "	Maximum download bandwidth that the users assigned to this template can achieve. Bandwidth can be specified in Kbit/s or Mbit/s
Upload bandwidth	integer; Default: " "	Maximum upload bandwidth that the users assigned to this template can achieve. Bandwidth can be specified in Kbit/s or Mbit/s
Download limit	integer; Default: " "	A received data limit that the users assigned to this template can reach. After the data limit is reached, the user will lose data connection. Download limit is specified in MB
Upload limit	integer; Default: " "	A received data limit that the users assigned to this template can reach. After the data limit is reached, the user will lose data connection. Download limit is specified in MB
Period	Month \| Week \| Day; Default: Month	The beginning of the period during which the restriction specified in this section will apply. After the period is over, all specified limits are reset
Start day \| Start hour	integer [1..31] \| Monday..Sunday \| integer [1..24]; Default: day 1	Specifies which day of the month, week or hour of the day the limits will be reset

MAC auth

MAC auth Authentication mode authenticates users by their MAC address. A list of accepted or unaccepted MAC addresses can be configured in the router's WebUI's Wireless section under Interface Configuration->MAC Filter


FIELD NAME	VALUE	DESCRIPTION
Enable	yes \| no; Default: no	Toggles Wi-Fi Hotspot ON or OFF
AP IP	ip; Default: 192.168.2.254/24	Access Point IP address defines the IP address of your Hotspot's network
Logout address	host \| ip; Default: 1.1.1.1	An address that can be used by users to logout from the Hotspot session
Authentication mode	External radius \| Internal radius \| Without radius \| Advertisement \| MAC auth \| SMS OTP; Default: Without radius	Authentication mode defines how users will connect to the Hotspot
Terms of service	yes \| no; Default: no	If enabled, users have to agree to the Terms of service before logging in. Custom Terms of service can be defined in the Landing Page section
Password protection	yes \| no; Default: no	Enables Hotspot password protection
Password	string; Default: " "	A password used to authenticate connecting clients to the Hotspot
Website access link	Link \| Auto redirect \| Custom address; Default: no	Requested website access mode
Protocol	HTTP \| HTTPS; Default: HTTP	Connection protocol of your Hotspot
HTTPS redirect	yes \| no; Default: no	Redirects HTTP pages to landing page
SSL key file	.key file; Default: " "	SSL key file used for authentication. This field becomes visible only if HTTPS redirect is enabled
SSL certificate file	.crt file; Default: " "	SSL certificate file used for authentication. This field becomes visible only if HTTPS redirect is enabled
Use custom DNS	yes \| no; Default: no	Enables the use of custom DNS servers instead of your regular DNS
DNS server 1 \| DNS server 2	ip; Default: " "	Additional DNS servers that are to be used by the Hotspot. These fields become visible only if Use custom DNS is enabled

SMS OTP

With SMS OTP Authentication mode connecting users are prompted to enter their phone number. After that, the router sends and SMS message containing a code to the specified number. Users then authenticate themselves to the Hotspot using this code.


FIELD NAME	VALUE	DESCRIPTION
Enable	yes \| no; Default: no	Toggles Wi-Fi Hotspot ON or OFF
AP IP	ip; Default: 192.168.2.254/24	Access Point IP address defines the IP address of your Hotspot's network
Authentication mode	External radius \| Internal radius \| Without radius \| Advertisement \| MAC auth \| SMS OTP; Default: Without radius	Authentication mode defines how users will connect to the Hotspot
Protocol	HTTP \| HTTPS; Default: HTTP	Connection protocol of your Hotspot
HTTPS redirect	yes \| no; Default: no	Redirects HTTP pages to landing page
SSL key file	.key file; Default: " "	SSL key file used for authentication. This field becomes visible only if HTTPS redirect is enabled
SSL certificate file	.crt file; Default: " "	SSL certificate file used for authentication. This field becomes visible only if HTTPS redirect is enabled
Use custom DNS	yes \| no; Default: no	Enables the use of custom DNS servers instead of your regular DNS
DNS server 1 \| DNS server 2	ip; Default: " "	Additional DNS servers that are to be used by the Hotspot. These fields become visible only if Use custom DNS is enabled

List Of Addresses The Client Can Access Without First Authenticating

You can configure a list of addresses that users connected to the Hotspot will be able to reach without any authentication. By default this list is empty. Click the Add button to add a new address.


FIELD NAME	VALUE	DESCRIPTION
Enable	yes \| no; Default: no	Enables or disables an entry of the list
Address	host \| ip; Default: " "	An address that users connected to the Hotspot can reach without authentication
Port	integer [0..65535]; Default: " "	Specifies the port through which the user can connect to the provided address. This field becomes visible only if Allow subdomains is disabled
Allow subdomains	yes \| no; Default: no	If checked, users can connect to the specified address and all of its subdomains

Restricted Internet Access

The Restricted Internet Access page provides you with the possibility to restrict internet access on Hotspot on specified hours. Blue squares represent restricted access, white squares - allowed access. Bellow is an example of a configuration that restricts internet access outside of working hours.

Logging

The Hotspot Logging section is used to periodically send Hotspot information to an FTP server.


FIELD NAME	VALUE	DESCRIPTION
Enable	yes \| no; Default: no	Toggles logging to FTP ON or OFF
Server address	host \| ip; Default: your.ftp.server	FTP server address.
User name	string; Default: username	User name used for authentication when logging into an FTP server
Password	string; Default: " "	Password used for authentication when logging into an FTP server
Port	integer [0..65535]; Default: 21	FTP server port
File name extras	No extra information \| MAC address \| Serial number \| Custom string; Default: No extra information	Extra information to be added to the log filename

FTP Upload Settings

Here you can configure your timing settings for the log upload via FTP feature.


FIELD NAME	VALUE	DESCRIPTION
Mode	Fixed \| Interval; Default: Fixed	The scheduling mode to be used for uploading to FTP server
Hours \| Minutes \| Days	time; Default: 8 hours 15 minutes	Time interval when the uploads will take place

Wifi Log/SMS OTP Log

WiFi and SMS OTP logs show information about connections to your WiFi Hotspot. FTP logging has to be enabled.

Landing Page

This section is used to define how your Hotspot's Landing Page will look like.

Template

This is a template based on the default landing page. You can edit its HTML code to make it look however you want!

Radius Server

This section is used to configure your Radius Server for use with Internal radius Authentication mode


FIELD NAME	VALUE	DESCRIPTION
Enable	yes \| no; Default: no	Toggles Radius Server ON or OFF
Remote access	yes \| no; Default: no	Toggles remote access to the Radius Server ON or OFF.
Authentication port	integer [0..65535]; Default: 1812	Radius server authentication port
Accounting port	integer [0..65535]; Default: 1813	Radius server accounting port

Session Settings

A Session Template is a set of rules that can be prescribed to a Hotspot user. A default template named unlimited is present in the router, but it has no configured restriction. You can edit the default template or you can create a custom template and configure it.


FIELD NAME	VALUE	DESCRIPTION
Idle timeout	integer; Default: " "	A timeout in seconds after which idle users are automatically disconnected from the Hotspot. 0 means unlimited
Session timeout	integer; Default: " "	A timeout in seconds after users are automatically disconnected from the Hotspot. The timeout countdown begins when a user is authenticated to the Hotspot and, after an amount of time specified in this field, the user gets disconnected from the Hotspot. 0 means unlimited
Download bandwidth	integer; Default: " "	Maximum download bandwidth that the users assigned to this template can achieve. Bandwidth can be specified in Kbit/s or Mbit/s
Upload bandwidth	integer; Default: " "	Maximum upload bandwidth that the users assigned to this template can achieve. Bandwidth can be specified in Kbit/s or Mbit/s
Download limit	integer; Default: " "	A received data limit that the users assigned to this template can reach. After the data limit is reached, the user will lose data connection. Download limit is specified in MB
Upload limit	integer; Default: " "	A sent data limit that the users assigned to this template can reach. After the data limit is reached, the user will lose data connection. Upload limit is specified in MB
Period	Month \| Week \| Day; Default: Month	The beginning of the period during which the restriction specified in this section will apply. After the period is over, all specified limits are reset
Start day \| Start hour	integer [1..31] \| Monday..Sunday \| integer [1..24]; Default: day 1	Specifies which day of the month, week or hour of the day the limits will be reset

Users Configuration Settings

The Users Configuration tab is used to create new, unique users that can connect to the Hotspot.


FIELD NAME	VALUE	DESCRIPTION
Username	string; Default: " "	A custom user name used to authenticate clients connecting to the Hotspot
Password	string; Default: " "	A custom password for the specified user name
Session Template	string; Default: unlimited	Session templates define session settings for different users. The unlimited Session Template is a default template with no restrictions. More on Session Template in the next section

Clients Configuration Settings


FIELD NAME	VALUE	DESCRIPTION
Enable	yes \| no; Default: no	Toggles Clients Configuration ON or OFF
Client name	string; Default: " "	A custom user name used to authenticate clients connecting to the Hotspot
IP address	ip; Default: " "	The IP address of the client
Netmask	integer [0..32]; Default: " "	The netmask of the client
Radius shared secret	string; Default: " "	Radius shared secret used for communication between the client/NAS and the radius server

Statistics

The Statistics page shows statistics about connections to the hotspot.

URL Parameters

Here you can set custom Captive Portal URL identification names.


FIELD NAME	VALUE	DESCRIPTION
UAMip	ip; Default: " "	The IP Address of the Captive Portal gateway
UAMport	integer [0..65535]; Default: " "	The port on which the Captive Portal will serve web content
Called	mac; Default: " "	The MAC address of the IP Address of the Captive Portal gateway
MAC	mac; Default: " "	The MAC address of the client trying to gain Internet access
IP	ip; Default: " "	The IP Address of the client trying to gain Internet access
NASid	string; Default: " "	An identification for the Captive Portal used in the RADIUS request
Sessionid	string; Default: " "	The unique identifier for the session
Userurl	url; Default: " "	The URL which the user tried to access before he was redirected to the Captive Portal's URL's pages
Challenge	string; Default: " "	A challenge that should be used together with the user's password to create an encrypted phrase used to log on
Custom No. 1	string; Default: " "	Adds a custom name and a custom value which will be displayed in url parameters
Custom No. 2	string; Default: " "	Adds a custom name and a custom value which will be displayed in url parameters

Manage

With the help of the Manage page you manage the users that are connected to your Hotspot. To reach the Manage window, go to Services->Hotspot. The Manage button will be located next to your Hotspot instance.

@@ Line 218: / Line 218: @@
 [[Image:Services hotspot configuration without.PNG]]
-{| class="wikitable"
+<table class="nd-mantable">
-|+
+    <tr>
-! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | FIELD NAME
+        <th>field name</th>
-! style="width: 250px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | VALUE
+       	<th>value</th>
-! style="width: 579px; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | DESCRIPTION
+       	<th>description</th>
-|-
+    </tr>
-! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enable
+    <tr>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | yes {{!}} no; Default: '''no'''
+      	<td>Enable</td>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Toggles Wi-Fi Hotspot ON or OFF
+       	<td>yes {{!}} no; Default: '''no'''</td>
-|-
+       	<td>Toggles Wi-Fi Hotspot ON or OFF</td>
-! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | AP IP
+    </tr>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | ip; Default: '''192.168.2.254/24'''
+    <tr>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Access Point IP address defines the IP address of your Hotspot's network
+    	<td>AP IP</td>
-|-
+        <td>ip; Default: '''192.168.2.254/24'''</td>
-! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Logout address
+        <td>Access Point IP address defines the IP address of your Hotspot's network</td>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | host {{!}} ip; Default: '''1.1.1.1'''
+    </tr>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | An address that can be used by users to logout from the Hotspot session
+    <tr>
-|-
+    	<td>Logout address</td>
-! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authentication mode
+        <td>host {{!}} ip; Default: '''1.1.1.1'''</td>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | External radius {{!}} Internal radius {{!}} Without radius {{!}} Advertisement {{!}} MAC auth {{!}} SMS OTP; Default: '''Without radius'''
+        <td>An address that can be used by users to logout from the Hotspot session</td>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Authentication mode defines how users will connect to the Hotspot
+    </tr>
-|-
+    <tr>
-! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Terms of service
+      	<td>Authentication mode</td>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | yes {{!}} no; Default: '''no'''
+       	<td>External radius {{!}} Internal radius {{!}} Without radius {{!}} Advertisement {{!}} MAC auth {{!}} SMS OTP; Default: '''Without radius'''</td>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | If enabled, users have to agree to the Terms of service before logging in. Custom Terms of service can be defined in the '''Landing Page''' section
+       	<td>Authentication mode defines how users will connect to the Hotspot</td>
-|-
+    </tr>
-! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | External landing page
+    <tr>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | yes {{!}} no; Default: '''no'''
+      	<td>Terms of service</td>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enables the use of an external landing page
+       	<td>yes {{!}} no; Default: '''no'''</td>
-|-
+       	<td>If enabled, users have to agree to the Terms of service before logging in. Custom Terms of service can be defined in the '''Landing Page''' section</td>
-! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Protocol
+    </tr>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | HTTP {{!}} HTTPS; Default: '''HTTP'''
+    <tr>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Connection protocol of your Hotspot
+    	<td>External landing page</td>
-|-
+        <td>yes {{!}} no; Default: '''no'''</td>
-! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | HTTPS redirect
+        <td>Enables the use of an external landing page</td>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | yes {{!}} no; Default: '''no'''
+    </tr>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Redirects HTTP pages to landing page
+    <tr>
-|-
+    	<td>Protocol</td>
-! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SSL key file
+        <td>HTTP {{!}} HTTPS; Default: '''HTTP'''</td>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | .key file; Default: " "
+        <td>Connection protocol of your Hotspot</td>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SSL key file used for authentication. This field becomes visible only if '''HTTPS redirect''' is enabled
+    </tr>
-|-
+    <tr>
-! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SSL certificate file
+      	<td>HTTPS redirect</td>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | .crt file; Default: " "
+       	<td>yes {{!}} no; Default: '''no'''</td>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | SSL certificate file used for authentication. This field becomes visible only if '''HTTPS redirect''' is enabled
+       	<td>Redirects HTTP pages to landing page</td>
-|-
+    </tr>
-! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Use custom DNS
+    <tr>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | yes {{!}} no; Default: '''no'''
+      	<td>SSL key file</td>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Enables the use of custom DNS servers instead of your regular DNS
+       	<td>.key file; Default: " "</td>
-|-
+       	<td>SSL key file used for authentication. This field becomes visible only if '''HTTPS redirect''' is enabled</td>
-! style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | DNS server 1 {{!}} DNS server 2
+    </tr>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | ip; Default: " "
+    <tr>
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: top; background: white;" | Additional DNS servers that are to be used by the Hotspot. These fields become visible only if '''Use custom DNS''' is enabled
+    	<td>SSL certificate file</td>
-|-
+        <td>.crt file; Default: " "</td>
-|}
+        <td>SSL certificate file used for authentication. This field becomes visible only if '''HTTPS redirect''' is enabled</td>
+    </tr>
+    <tr>
+    	<td>Use custom DNS</td>
+        <td>yes {{!}} no; Default: '''no'''</td>
+        <td>Enables the use of custom DNS servers instead of your regular DNS</td>
+    </tr>
+    <tr>
+    	<td>DNS server 1 {{!}} DNS server 2</td>
+        <td>ip; Default: " "</td>
+        <td> Additional DNS servers that are to be used by the Hotspot. These fields become visible only if '''Use custom DNS''' is enabled</td>
+    </tr>
+</table>
 ====Users Configuration====