Difference between revisions of "Reaching Cisco router console port remotely"

From Teltonika Networks Wiki
(Created page with "Using RJ45 – USB type A or MiniUSB – USB type A configuration. Configured from the WebUI, Services → <b>USB Tools</b> → USB to Serial page: Fil...")
 
Line 2: Line 2:
  
 
[[File:Cisco usb config.png]]
 
[[File:Cisco usb config.png]]
 
+
----
 
Using RJ45 – RS232. To connect another DCE device to RUT955, a Null-modem (crossed) Male/Male cable should be used:
 
Using RJ45 – RS232. To connect another DCE device to RUT955, a Null-modem (crossed) Male/Male cable should be used:
  
 
[[File:cisco rs v2.png]]
 
[[File:cisco rs v2.png]]
 
+
----
 
RS232 can be configured from the Services → RS232/RS485 → <b>[[RUT955_RS232/RS485#RS232|RS232 Configuration]]</b> page. The following RS232 configuration should be used:
 
RS232 can be configured from the Services → RS232/RS485 → <b>[[RUT955_RS232/RS485#RS232|RS232 Configuration]]</b> page. The following RS232 configuration should be used:
  
 
[[File:cisco rs config.png]]
 
[[File:cisco rs config.png]]

Revision as of 12:43, 22 January 2019

Using RJ45 – USB type A or MiniUSB – USB type A configuration. Configured from the WebUI, Services → USB Tools → USB to Serial page:

Cisco usb config.png


Using RJ45 – RS232. To connect another DCE device to RUT955, a Null-modem (crossed) Male/Male cable should be used:

Cisco rs v2.png


RS232 can be configured from the Services → RS232/RS485 → RS232 Configuration page. The following RS232 configuration should be used:

Cisco rs config.png