Template:Networking rut9xx first start hardware installation: Difference between revisions

From Teltonika Networks Wiki
(Created page with "==Hardware installation== <ol> <li>Remove the SIM card slot tray(s) with the pin needle. Insert your SIM card(s) and push the tray(s) back into the router. Correct SIM ca...")
 
m (Protected "Template:Networking rut9xx first start hardware installation" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
(No difference)

Revision as of 10:33, 19 February 2019

Hardware installation

  1. Remove the SIM card slot tray(s) with the pin needle. Insert your SIM card(s) and push the tray(s) back into the router. Correct SIM card orientation can be seen in the figure below:
    [[File:{{{file_sim)|{{{size_sim)px]]
  2. Attach 3G and WiFi antennas
  3. Connect the power adapter to the power socket located on the front panel of the device. Then plug the other end of the power adapter into a wall socket.
  4. Connect to the device wirelessly (SSID: {{{name}}}_****) or use an Ethernet cable.
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rut9xx_first_start_hardware_installation&oldid=27918"