Template:Networking rutxxx manual powering options: Difference between revisions

Revision as of 09:35, 7 March 2019

This chapter contains information on powering options supported by {{{name}}} routers.

[[Category:{{{name}}} Manual]]

@@ Line 1: / Line 1: @@
 This chapter contains information on <b>powering options</b> supported by {{{name}}} routers.
 __TOC__
-==Power socket==
+{{Template: networking_rutxxx_manual_powering_options_power_socket
+| name = {{{name}}}
-The router has a 4 pin power socket and can be powered by a <b>9-30 VDC</b> power supply unit (PSU). Refer to the table below for the power socket's pinout information:
+| series = {{{series}}
-{{#ifeq:{{{name}}} | RUT850
-  | {{Template: Networking_rut8xx_manual_power_socket_pinout}}
-  | {{Template: Networking_rutxxx_manual_power_socket_pinout}}
 }}
-If you decide not to use our standard 9 VDC wall adapters and want to power the device from a higher voltage (15-30 VDC) please make sure that you choose a power supply of high quality. Some power supplies can produce voltage peaks significantly higher than the declared output voltage, especially during connection and disconnection.
-While the device is designed to accept input voltage of up to 30 VDC peaks, high voltage power supplies can harm the device. If you want to use high voltage power supplies it is recommended to also use additional safety equipment to suppress voltage peaks from the power supply.
 {{#ifeq:{{{name}}} | RUT850