Template:Networking rut manual services: Difference between revisions

Revision as of 10:29, 19 November 2019

Summary

The Services page is used for easy service management. From here you can turn most of your device's services ON or OFF or restart them, without navigating to the respective section where it was originally configured.

The information in this page is updated in accordance with the [[Media:{{{fw_version}}}_WEBUI.bin|{{{fw_version}}}]] firmware version.

Services

The Services table displays the status of most of the device's services. Services that are currently inactive are displayed in a grey font, while active ones are highlighted in blue.

The figure below is an example of the Services page:

[[File:{{{file_services}}}]]

Click the zone next to a service where it says "Disabled" or "Enabled" to turn that service ON or OFF. Click "Restart" to restart a service.

Additional notes:

Some services have to be configured before they can be enabled from this page. If you don't know where or how you can configure a certain service, try checking out the [[{{{name}}} Services section]] for guidance
By default, only [[{{{name}}} NTP|NTP]] and [[{{{name}}} SMS Utilities|SMS Utilities]] services are enabled
Restarting a service that is disabled does nothing
Some services have to be installed via [[{{{name}}}Packages|Package Manager]], before they can be visible.

[[Category:{{{name}}} WebUI]]

@@ Line 3: / Line 3: @@
 The <b>Services</b> page is used for easy service management. From here you can turn most of your device's services ON or OFF or restart them, without navigating to the respective section where it was originally configured.
+{{Template: Networking_rutxxx_manual_fw_disclosure| fw_version = {{{fw_version}}}}}
 ==Services==