Changes

==Output==

==Output==

The <b>Output</b> section is used to configure the router's output {{ifeq:{{{name}}}|RUT955|pins|pin}}.

The <b>Output</b> tab is used to configure the router's output {{ifeq:{{{name}}}|RUT955|pins|pin}}.

===Output Configuration===

===Output Configuration===

----

----

The '''Output Configuration''' tab is used to change the default states of the router's outputs.

The <b>Output Configuration</b> section is used to change the default {{ifeq:{{{name}}}|RUT955|states|state}} of the router's output {{ifeq:{{{name}}}|RUT955|pins|pin}}.

[[File:Services inputoutput output configuration v2.png]]

[[File:{{{file_output_config}}}]]

<table class="nd-mantable">

<table class="nd-mantable">

     <tr>

     <tr>

         <th>field name</th>

         <th>Field</th>

       <th>value</th>

       <th>Value</th>

       <th>description</th>

       <th>Description</th>

     </tr>

     </tr>

     <tr>

     <tr>

       <td>Open collector output</td>

       <td>Open collector output</td>

       <td>High level | Low level; Default: '''Low level'''</td>

       <td>Low level | High level; default: <b>High level</b></td>

       <td>Changes the default<span style="color:#0054A6;">'''*'''</span> state of the Open collector (OC) output</td>

       <td>Changes the default<span class="asterisk">*</span> state of the open collector (OC) output pin.</td>

     </tr>

     </tr>{{#ifeq:{{{name}}}RUT955|

     <tr>

     <tr>

       <td>Relay output</td>

       <td>Relay output</td>

       <td>Contacts open | Contacts closed; Default: '''Contacts closed'''</td>

       <td>Contacts open <nowiki>|</nowiki> Contacts closed; default: <b>Contacts closed</b></td>

       <td>Relay Output default state</td>

       <td>Changes the default<span class="asterisk">*</span> state of the relay output pin.</td>

     </tr>

     </tr>|}}

</table>

</table>

<span style="color:#0054A6;">'''*'''</span> Changing the default state of an output means that the changes will be written into the input/output config and saved, therefore making the change permanent. This means that, unless some other related change occurs, the state of the output will remain as set in this section. Therefore, if the input/output service restarts or the device reboots, it will have no effect on the state of the output.

<span class="asterisk">*</span> Changing the default state of an output means that the changes will be written into the input/output config and saved. This means that unless some other related change occurs the state of the output will remain as set in this section.

 

===ON/OFF===

===ON/OFF===

----

----

The '''ON/OFF''' section is used to turn Outputs ON or OFF, but it doesn't save the state permanently, meaning that after a reboot the states will revert back to their default values.

The <b>ON/OFF</b> section is used to turn the router's {{#ifeq:{{{name}}}|RUT955|outputs|output}} on or off. This action does not save the state permanently, meaning that after a reboot the {{#ifeq:{{{name}}}|RUT955|states|state}} will revert back to their default values.

 

===Post/Get Configuration===

===Post/Get Configuration===

----

----