RUT955 Input/Output: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
Line 19: Line 19:
| file_output_scheduler = Networking_rut955_manual_input_output_output_scheduler_v1.png
| file_output_scheduler = Networking_rut955_manual_input_output_output_scheduler_v1.png
}}
}}
===Post/Get Configuration===
----
'''Post/Get Configuration''' allows you to perform action requests by writing them in the URL field after your device’s IP address.
[[File:Services inputoutput output post get v2.png]]
<table class="nd-mantable">
    <tr>
        <th>field name</th>
      <th>value</th>
      <th>description</th>
    </tr>
    <tr>
      <td>Enable</td>
      <td>yes | no; Default: '''no'''</td>
      <td>Toggles POST/GET ON or OFF</td>
    </tr>
    <tr>
      <td>Username</td>
      <td>string; Default: " "</td>
      <td>Username used for authentication in POST/GET queries</td>
    </tr>
    <tr>
    <td>Password</td>
        <td>string; Default: " "</td>
        <td>Password used for authentication in POST/GET queries</td>
    </tr>
</table>
====Post/Get usage====
----
{{Template: webui_services_input_output_post_get_configuration_usage}}
<table class="nd-othertables">
    <tr>
        <th style="width: 500px">ACTION</th>
      <th style="width: 900px">POST/GET URL EXAMPLE</th>
    </tr>
    <tr>
      <td>Turn Relay Output ON</td>
      <td>http://192.168.1.1/cgi-bin/output?username=user1&password=user1&action=on&pin=relay</td>
    </tr>
    <tr>
      <td>Turn Relay Output ON after a 10 second delay</td>
      <td>http://192.168.1.1/cgi-bin/output?username=user1&password=user1&action=on&pin=relay&delay=10</td>
    </tr>
    <tr>
    <td>Turn Relay Output ON for 5 seconds</td>
        <td>http://192.168.1.1/cgi-bin/output?username=user1&password=user1&action=on&pin=relay&time=5</td>
    </tr>
    <tr>
    <td>Turn Relay Output ON for 5 seconds after a 15 second delay</td>
        <td>http://192.168.1.1/cgi-bin/output?username=user1&password=user1&action=on&pin=relay&delay=15&time=5</td>
    </tr>
    <tr>
      <td>Turn Relay Output OFF for 5 seconds after a 15 second delay</td>
      <td>http://192.168.1.1/cgi-bin/output?username=user1&password=user1&action=off&pin=relay&delay=15&time=5</td>
    </tr>
    <tr>
    <td>Turn Open Collector Output ON</td>
        <td>http://192.168.1.1/cgi-bin/output?username=user1&password=user1&action=on&pin=oc</td>
    </tr>
    <tr>
    <td>Turn Open Collector Output OFF</td>
        <td>http://192.168.1.1/cgi-bin/output?username=user1&password=user1&action=off&pin=oc</td>
    </tr>
</table>
'''Overview''':
* '''192.168.1.1''' - router's default LAN IP address; replace it in accordance with your own configuration
* '''username''' - login name from Post/Get Configuration
* '''password''' - password from Post/Get Configuration
* '''action''' - the action that is to be performed on the specified Output (can be '''on''' or '''off''')
* '''pin''' - specifies on which Output the action will be applied (can be '''oc''' or '''relay''')
* '''delay''' - defines a delay (in seconds) after which the specified action will be performed
* '''time''' - defines a window of time during which the action will take place. For instance, if you post an ON action for an output while specifying '''time=5''', that Output will turn ON and stay ON for 5 seconds before turning OFF
Delay and time parameters can be used together. For example, if delay is 10, time is 5, action is on, then 10 seconds after the execution of the command, the output will switch to ON (or stay in ON state if it was already ON), then after 5 more seconds it will switch to OFF state. In this case, the overall command execution time is 15 seconds.
Actions ON and OFF depend on setting „Output configuration in active state“ (ON is active state), which can be set via [[Input/Output#Output|Services → Input/Output → Output]]


===Periodic Control===
===Periodic Control===

Revision as of 13:36, 29 July 2019

Main Page > EOL Products > RUT955 > RUT955 Manual > RUT955 WebUI > RUT955 Services section > RUT955 Input/Output

Template:Networking rutxxx manual input output

Periodic Control

The Periodic control section allows you to set up automatic output control rules that trigger output state changes at the specified period or interval.

field name value description
Enable yes | no; Default: no Toggles the rule ON or OFF
Output Digital OC output | Digital Relay output; Default: Digital OC output To which output the rule pertains
Action On | Off; Default: On Periodic action to be taken
Action timeout yes | no; Default: no Activates action timeout. Action timeout specifies whether an action should end after some time. For example, if the specified Action is to turn Digital OC output On and the action triggers, the Action timeout then turns Digital OC output back off after a specified amount of time in seconds specified in this field
Timeout (sec) integer; Default: " " Specifies how long the Action timeout is
Mode Fixed | Interval; Default: Fixed Fixed mode triggers the specified action on a specified day(s), hour and minute. For example, every Sunday at 8:30 AM
Interval provides you with the possibility to set up an interval after which the same action takes place

Scheduler

The Scheduler lets you configure a schedule of when certain outputs are to be enabled or disabled.

Additional Information

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=RUT955_Input/Output&oldid=41588"