Difference between revisions of "Serial Interface Control Commands"
From Teltonika Networks Wiki
Line 6: | Line 6: | ||
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=32 '''3.1. AT&C Set DCD Function Mode - page 31'''] | [https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=32 '''3.1. AT&C Set DCD Function Mode - page 31'''] | ||
+ | |||
+ | The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode. | ||
+ | |||
+ | [https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=32 '''3.2. AT&D Set DTR Function Mode - page 31'''] |
Revision as of 10:58, 22 November 2019
TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > Serial Interface Control CommandsSerial Interface Control Commands
The command controls the behavior of the UE‟s DCD (data carrier detection) line.
3.1. AT&C Set DCD Function Mode - page 31
The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode.