Changes

==Adding devices on Cloud of Things platform==

==Adding devices on Cloud of Things platform==

After successfully installing the package and making the required configuration, you can add the device on Cloud of Things platform.   

After successfully installing the package and making the required configuration on the router, you now can add the device on Cloud of Things platform. After logging in to the website you are forwarded to Cockpit page. There press '''Device manager'''.   

[[Image:Cloud of things adding device 1.png]]

[[Image:Cloud of things adding device 1.png]]

[[Image:Cloud of things adding device 2.png]]

[[Image:Cloud of things adding device 2.png]]

Press '''Register device'''.

 

 

 

Reset Auth – once device has been removed from the Cumulocity Device Management, you will need to reset authentication in order to re-register device.

 

[[Image:Cloud of things adding device 3.png]]

[[Image:Cloud of things adding device 3.png]]

There are two ways to register your device(s) '''Bulk''' and '''General'''. Bulk is used to register more than one device at once. In this example we will be using the '''General''' option.

 

Now you need to register device on Device Management in Cumulocity Cockpit.  

 

Device registration is done by writing down device's serial number. In order to obtain your device's serial number, look at the backplate of it or navigate to your device's control panel and then to „Status → Device“ page:

[[Image:Cloud of things adding device 4.png]]

[[Image:Cloud of things adding device 4.png]]

[[Image:Cloud of things adding device 5.png]]

[[Image:Cloud of things adding device 5.png]]