AT Commands

AT commands ("AT" meaning 'attention') are instructions used to control a modem.

Summary

The command set consists of a series of short text strings which can be combined to produce commands for operations such as dialing, managing SMS functions, and changing the parameters of the connection. Many of the commands that are used to control wired dial-up modems, such as ATD (Dial), ATA (Answer), ATH (Hook control) and ATO (Return to online data state), are also supported by GSM/GPRS modems and mobile phones. This section is an overview of some AT commands that can be used with RUT routers.

gsmctl commands

gsmctl is a set of shell commands that can request information from or perform operations on a modem. In other words, gsmctl is a way to use AT commands in shell form. You can use them via SSH or CLI, the command line interface that can be used via the router's WebUI.

SSH

To log in to a RUT router via SSH, download the free PuTTY app if you're using Windows; if you're using a Linux based OS, just use the Terminal app. In both cases you will need to know three things: the router's LAN IP address, user name and password. The default LAN IP address for all RUT routers is 192.168.1.1; the default log in information is username: root; password: admin01 (NOTE: the user name used for SSH connections (i.e., root) is not the same as the user name used to log in to the router's WebUI (i.e., admin)).

If you're using PuTTY, enter the router's LAN IP address into the Host Name (or IP address) field, select SSH Connection type and click Open. After this you will be prompted to enter the user name and password.

If you're using Linux, open a Terminal and type this command:

# ssh [email protected]

If you made changes to LAN IP address or log in name, replace the relevant data in the command above so that it is correct for your specific case. After executing this command you will prompted to enter the router's admin password.

Usage

The syntax for a gsmctl command is gsmctl OPTIONS. A list possible gsmctl options is provided below:

 -p, --ip <INTERFACE>		Get IP of logical interface
 -e, --bsent <INTERFACE>	Get number of bytes sent
 -r, --brecv <INTERFACE>	Get number of bytes recieved
 -j, --connstate		Get 3G connection state
 -g, --netstate		Get network link state
 -i, --imei			Get device IMEI
 -J, --iccid			Get SIM ICCID
 -m, --model			Get device model
 -w, --manuf			Get device manufacturer
 -a, --serial			Get device serial number
 -y, --revision		Get device revision number
 -x, --imsi			Get IMSI
 -z, --simstate		Get SIM card state
 -u, --pinstate		Get PIN state
 -q, --signal			Get GSM signal level
 -X, --rscp    		Get WCDMA rscp level
 -E, --ecio    		Get WCDMA ec/io level
 -W, --rsrp   		        Get LTE rsrp level
 -Z, --sinr  			Get LTE sinr level
 -M, --rsrq 			Get LTE rsrq level
 -C, --cellid 		        Get cell id parameter
 -o, --operator		Get name of operator used
 -f, --opernum  		Get operator number
 -t, --conntype		Get data carrier type
 -c, --temp			Get module temperature in 0.1 degrees Celcius
 -B, --pincount		Get pin/puk count
 -F  --network		        Get network information
 -K  --serving		        Get serving cell information
 -I  --neighbour		Get neighbour cell information
 -D, --shutdown		Shutdown the modem
 -h, --help			Prints this information
 -v, --version  		Print version

sms managing options:
 -S -r, --sms --read		<INDEX>	Read SMS by index
 -S -l, --sms --list		<TYPE>	List SMS by type [all, read, new]
 -S -t, --sms --total		Print SMS memory usage
 -S -d, --sms --delete	<INDEX>	Delete SMS by index
 -S -s, --sms --send "<NUMBER> <TEXT>"	Send SMS. IMPORTANT! Number and text must be within quotes
 -S -b, --sms --send-b64 <NUMBER>	Send SMS encoded in base64 from /tmp/.smstext

compatibility options:
 -N, --he910			Support for Telit HE910-EUD
 -R, --em820w			Support for Huawei EM820W
 -U, --me909u			Support for Huawei LTE ME909u
 -V, --le910			Support for Telit LE910

auxiliary options:
 -A, --at <COMMAND>		Send AT command to device
 -H, --shell			Enter shell mode
 -k, --debug			Enable debug information
 -n, --nolog			Do not log the command

You can view this list via terminal by typing gsmctl -h or gsmctl --help.

For example, try using gsmctl -q to get the current RSSI value in dBm. You can also combine options. For example, gsmctl -oqt:

Unlike gsmctl -q, gsmctl -oqt returns three options: operator's name, signal quality level and carrier type, as you can see in the example above.

AT command usage

To use a specific AT command via SSH, you can use the gsmctl -H. After this your console will enter shell mode where you can then just type AT commands in their regular format. Or you can use gsmctl -A <AT_COMMAND> to execute AT commands one at a time. Continuing from the example above, lets say you want to find out the RSSI value. While there are quite a few commands that can be used to achieve this goal, lets use the AT+CSQ that is used when executing gsmctl -q:

As you can see this time the command returns two values instead of one, and they don't directly represent the RSSI value as with gsmctl -q. The reason for this is that AT+CSQ indicates the received signal strength <rssi> and the channel bit error rate <ber> and the numbers returned are not the direct values but rather the representation of the direct values.

<rssi>
0              -113dBm or less
1              -111dBm
2...30         -109dBm... -53dBm
31             -51dBm or greater
99             Not known or not detectable
100            -116dBm or less
101            -115dBm
102...190      -114dBm...-26dBm
191            -25dBm or greater
199            Not known or not detectable
100~199        Extended to be used in TD-SCDMA indicating received signal code power (RSCP)

<ber>          Channel bit error rate (in percent)
0...7          As RXQUAL values in the table in 3GPP TS 45.008 subclause 8.2.4
99             Not known or not detectable

So the response above indicates that the RSSI value is -75 dBm (because that's what 19 represents since it falls in the 2..30 range) and the channel bit error rate is Not known or not detectable (because that's what 99 represents).

---

As another example, lets try to get network operator information.

+COPS: <mode>[,<format>[,<oper>][,<Act>]]

<oper>         Operator in format as per <mode>

<mode>
0              Automatic mode. <oper> field is ignored
1              Manual operator selection. <oper> field shall be present and <Act> optionally
2              Manually deregister from network
3              Set only <format> (for AT+COPS? Read Command), and do not attempt registration/deregistration (<oper> and <Act> fields are ignored).
               This value is invalid in the response of Read Command
4              Manual/automatic selection. <oper> field shall be presented. If manual selection fails, automatic mode (<mode>=0) is entered

<format>
0              Long format alphanumeric <oper> which can be up to 16 characters long
1              Short format alphanumeric <oper>
2              Numeric <oper>. GSM location area identification number

<Act>          Access technology selected.
               Values 3, 4, 5 and 6 occur only in the response of Read Command while MS is in data service state and is not intended for the AT+COPS Write Command.
0              GSM
2              UTRAN
3              GSM W/EGPRS
4              UTRAN W/HSDPA
5              UTRAN W/HSUPA
6              UTRAN W/HSDPA and HSUPA
7              E-UTRAN
100            CDMA

External links

PuTTY download - https://www.putty.org/