Template:Networking trb2xx manual ethernet port leds: Difference between revisions

Revision as of 10:27, 1 April 2020

Ethernet port LEDs

The Ethernet port LEDs are located on the gateway front panel, in the corners of Ethernet port:

[[File:{{{file_eth_led}}}|{{{size_eth}}}px]]

Since {{{name}}} gateway supports Fast ethernet speeds, green LED is not used and only orange LED represents information about ethernet connection activity:

Action	Description
LED turned ON	Operating as a 10/100 Mbps connection
LED turned OFF	No link established
LED blinking	Connection established and there is activity (data being transferred)
LED gradually fades in and out	Router is in the web recovery menu state*
LED always ON (with or without cable connected)	Router is in bootloader mode**

* The web recovery menu is a special router state from which certain upgrades can be performed. For more information on the web recovery menu, click here

** To exit bootloader mode cycle power with pressing any button and gateway should boot up normally, if after power cycle gateway entered bootloader mode again contact your supplier or Teltonika support in crowd support forum

Revision as of 10:26, 1 April 2020 (view source) Tomas.mikolaitis (talk \| contribs) No edit summary ← Older edit		Revision as of 10:27, 1 April 2020 (view source) Tomas.mikolaitis (talk \| contribs) No edit summary Newer edit →
Line 36:		Line 36:
	<span class="asterisk">*</span> The <b>web recovery menu</b> is a special router state from which certain upgrades can be performed. For more information on the web recovery menu, click [[Bootloader menu\|here]]		<span class="asterisk">*</span> The <b>web recovery menu</b> is a special router state from which certain upgrades can be performed. For more information on the web recovery menu, click [[Bootloader menu\|here]]

	<span class="asterisk">**</span> To exit bootloader mode cycle power with pressing any button and gateway should boot up normally, if after power cycle gateway entered bootloader mode again contact your supplier or Teltonika support in [https://community.teltonika-networks.com crowd support forum]		<span class="asterisk">**</span> To exit <b>bootloader mode</b> cycle power with pressing any button and gateway should boot up normally, if after power cycle gateway entered bootloader mode again contact your supplier or Teltonika support in [https://community.teltonika-networks.com crowd support forum]