RUT FAQ: Difference between revisions
No edit summary |
m (Protected "RUT FAQ" ([Edit=Allow only autoconfirmed users] (indefinite) [Move=Allow only autoconfirmed users] (indefinite))) |
(No difference)
| |
Revision as of 15:02, 16 April 2018
- General Questions
- My router went to „Safe mode“, what should I do?
- How can I configure port forwarding on my router?
- Port forwarding does not work, what should I do?
- How to limit internet speeds for specific Wi-Fi users?
- How to limit the router's internet speed?
- How can I block specific websites so that clients would not be able to access them?
- I entered the wrong password several (5) times and now I cannot reach the router’s WebUI, what should I do?
- How to use SMS commands?
- How to download and upload a backup file?
- Where can I find newest manuals and flyers for RUT devices?
- Where are MAIN and AUX LTE antenna connectors on RUT9XX and RUT240?
- Can I use routers in a vehicle?
- Can I send GPS data to my server?
- What OS do RUT routers use?
- Can I use LTE/3G/Wi-Fi antennas other than Teltonika's?
- Can your routers (RUT2XX, RUT9XX) be powered over Ethernet cable (PoE)?
- What LTE/3G/2G network frequencies do RUT routers support?
- How can I restart a router that can‘t be accessed remotely via the Internet?
- What is the maximum range of the wireless signal on RUT devices?
- What is the input/output count of different Teltonika routers?
- Can both SIM cards be active at the same time in RUT9XX series routers?
- What is a Netmask?
- RUT955 GPS protocols
- RUT850 GPS protocols
- Remote Access
- How can I create an RMS account?
- How to add device to RMS?
- How to enable remote access on the router?
- How can I access my router remotely through the WAN interface?
- How to access the router remotely via browser without the use of a Public IP?
- Routers do not show up on RMS even when the router has an internet connection
- Router is online in RMS but I cannot see GPS data
- My router has a Dynamic Public IP address. How can I reach it via the Internet without checking what IP address it is currently using?