Template:Networking rut manual cli: Difference between revisions

Revision as of 13:42, 16 September 2020

The information in this page is updated in accordance with the [[Media:_WEBUI.bin|]] firmware version.

Summary

The CLI or Command Line Interface functionality allows you to enter and execute Linux commands within the router. This chapter is an overview of the CLI section for {{{name}}} routers.

CLI

CLI is a console interface similar to the Linux Terminal program. Use the following credentials to log in:

Username: root
Password: router's password

If the login was successful, you should be greeted with a window like this:

[[File:Networking_{{{name}}}_manual_cli.png|border|class=tlt-border]]

[[Category:{{{name}}} Services section]]

@@ Line 1: / Line 1: @@
+{{Template: Networking_rutxxx_manual_fw_disclosure
+| fw_version = {{#switch: {{{series}}}
+  | RUT2XX = {{{series}}}_R_00.01.12
+  | RUT9XX = {{{series}}}_R_00.06.06.1}}
+| series     = {{{series}}}
+}}
 __TOC__
 ==Summary==
 The <b>CLI</b> or <b>Command Line Interface</b> functionality allows you to enter and execute Linux commands within the router. This chapter is an overview of the CLI section for {{{name}}} routers.
-{{Template: Networking_rutxxx_manual_fw_disclosure
-| fw_version = {{{fw_version}}}
-}}
 ==CLI==
@@ Line 19: / Line 21: @@
 If the login was successful, you should be greeted with a window like this:
-[[File:{{{file_cli}}}]]
+[[File:Networking_{{lc:{{{name}}}}}_manual_cli.png|border|class=tlt-border]]
 [[Category:{{{name}}} Services section]]