Template:Networking rutos manual vrrp

Summary

Virtual Router Redundancy Protocol (VRRP) is a computer networking protocol used for automatic default gateway selection for clients on a LAN network in case the main router (Master) becomes unavailable. Another VRRP router (Backup) then assumes the role of Master; thus backing up the connection.

This page is an overview of the VRRP section of {{{name}}} routers.

VRRP

To begin configuring VRRP you must first add a new VRRP configuration instance. You can do that by entering a custom name for the configuration and clicking the 'Add' button. A new VRRP configuration instance will appear in the "VRRP Configurations" list.

File:Networking rutx manual vrrp vrrp configurations v1.png

VRRP configuration

---

To begin configuring a VRRP instance, click the button that looks like a pencil next to it.

The VRRP LAN configuration settings section is used to set the main settings of VRRP. Refer to the figure and table below for information on the fields contained in that section.

File:Networking rutx manual vrrp vrrp configuration settings v1.png

Field	Value	Description
Enable	off | on; default: off	Turns VRRP on or off.
Virtualize MAC	off | on; default: off	Turns the possibility to use virtual MAC addresses on or off.
Virtual ID	integer [1..255]; default: 1	The Virtual Router Identifier (VRID) is a field in the VRRP packet IP header used to identify the virtual router in the VRRP cluster. Routers with identical IDs will be grouped in the same VRRP cluster.
Priority	integer [1..255]; default: 100	VRRP priority of the virtual router. Higher values equal higher priority. The router with the highest priority is considered to be the Master router while other routers are Backup routers. sends periodic VRRP Advertisement messages Master router - the first hop router in the VRRP cluster (i.e., the router that provides connectivity to LAN devices by default). Backup router - assumes the role of Master router in case it becomes unavailable. If there multiple Backup routers in the VRRP cluster, the one with the highest priority will assume the role of Master.
Interface	network interface; default: LAN	Selects which interface VRRP will operate on.
IP address	ip; default: 192.168.1.253	Virtual IP address for the router's VRRP cluster.

See also

• VRRP configuration example

[[Category:{{{name}}} Services section]]