TRB145 Remote Monitoring & Administration: Difference between revisions
(Created page with "{{Template: Networking_device_manual_remote_management | name = TRB145 | series = TRB14x | sms = 0 | json = 0 | vpn = 0 | snmp = 0 | modbus = 0 | mqtt = 0 | tr06...") |
m (Protected "TRB145 Remote Monitoring & Administration" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
(No difference)
| |
Revision as of 11:44, 12 June 2020
Main Page > TRB Gateways > TRB145 > TRB145 Manual > TRB145 Remote Monitoring & AdministrationTRB145 supports multiple monitoring and administration possibilities.
Remote control options
The TRB145 router supports the following remote control capabilities:
| Remote control method | Can get parameters | Can set parameters |
|---|---|---|
| RMS |  |
|
| SSH | |
|
| HTTP | |
|
RMS
The Remote Management System (RMS) is designed to conveniently monitor and manage all your Teltonika networking devices. The system allows to securely gather status information of your devices and to change their configuration even if the devices do not have public IP addresses.
RMS access can be configured from the System → Administration → RMS page.
Public IP
If you're using a SIM card that has a Public IP address (refer here for more information), you can reach the gateway via HTTP or SSH via its WAN IP address.
HTTP access
Remote HTTP access can be set up via the System → Administration → Access Control page.
SSH access
Remote SSH access can be set up via the System → Administration → Access Control page.