Template:Networking rutos manual snmp: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
Line 1: Line 1:
<!-- Template uses {{{name}}}, {{{series}}}, and if device doesnt have mobile then {{{mobile}}} = 0-->
<!-- Template uses {{{name}}}, {{{series}}}, and if device doesnt have mobile then {{{mobile}}} = 0-->
{{Template:Networking_rutos_manual_fw_disclosure
{{Template:Networking_rutos_manual_fw_disclosure
| fw_version = {{{series}}}_R_00.02.04.1
| fw_version = {{{series}}}_R_00.02.05
| series    = {{{series}}}
| series    = {{{series}}}
}}
}}
Line 7: Line 7:
==Summary==
==Summary==


Simple Network Management Protocol (SNMP) is a popular protocol for network management.
<b>Simple Network Management Protocol (SNMP)</b> is a network management protocol used for collecting information and configuring network devices. This page is an overview of the SNMP function in {{{name}}} devices.
It is used for collecting information, and configuring, network devices.
This section is an overview of the SNMP function in {{{name}}} devices.
 
You can download <b>MIB file</b> for each device in their <b>SNMP settings</b> page, at <b>SNMP System Summary</b> section.


{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
Line 19: Line 15:
==SNMP settings==
==SNMP settings==


The <b>SNMP settings</b> page is used to configure SNMP accessibility and general information in your device.
The <b>SNMP settings</b> page is used to configure SNMP accessibility and general SNMP information for your device.


===SNMP agent settings===
===SNMP agent settings===
----
----
[[File:Networking rutx manual snmp agent settings v2.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_snmp_snmp_agent_settings.png|border|class=tlt-border]]
 
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
         <th>field name</th>
         <th>Field</th>
         <th>value</th>
         <th>Value</th>
         <th>description</th>
         <th>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Enable SNMP service</td>
         <td>Enable SNMP service</td>
         <td>off | on; default: '''off'''</td>
         <td>off | on; default: <b>off</b></td>
         <td>Run SNMP service on system's startup.</td>
         <td>Run SNMP service on system's startup.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Enable remote access</td>
         <td>Enable remote access</td>
         <td>off | on; default: '''off'''</td>
         <td>off | on; default: <b>off</b></td>
         <td>Open port in firewall so that SNMP service may be reached from WAN.</td>
         <td>Open port in firewall so that SNMP service may be reached from WAN.</td>
     </tr>
     </tr>
Line 62: Line 59:
     <tr>
     <tr>
         <td>SNMP v3 Mode</td>
         <td>SNMP v3 Mode</td>
         <td>off | on; default: '''off'''</td>
         <td>off | on; default: <b>off</b></td>
         <td>Enable/disable SNMP v3 Mode.</td>
         <td>Enable/disable SNMP v3 Mode.</td>
     </tr>
     </tr>
</table>
</table>
===SNMP system summary===
 
===SNMP System Summary===
----
----
[[File:Networking rutx manual snmp system summary v2.png|border|class=tlt-border]]
The <b<SNMP System Summary</b> section contains general information about SNMP on this device. You can also download this device's <b>MIB file</b> from this section.
 
[[File:Networking_rutos_manual_snmp_snmp_system_summary.png|border|class=tlt-border]]
 
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
         <th>field name</th>
         <th>Field</th>
         <th>value</th>
         <th>Value</th>
         <th>description</th>
         <th>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>MIB file</td>
         <td>MIB file</td>
         <td>-(interactive button)</td>
         <td>-(interactive button)</td>
         <td>Downloads device MIB file.</td>
         <td>Downloads the device's MIB file.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 87: Line 88:
     <tr>
     <tr>
         <td>Location</td>
         <td>Location</td>
         <td>string; default: '''location'''</td>
         <td>string; default: <b>location</b></td>
         <td>Trap named sysLocation.</td>
         <td>Trap named sysLocation.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Contact</td>
         <td>Contact</td>
         <td>string; default: '''[email protected]'''</td>
         <td>string; default: <b>[email protected]</b></td>
         <td>Trap named sysContact.</td>
         <td>Trap named sysContact.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Name</td>
         <td>Name</td>
         <td>string; default: '''name'''</td>
         <td>string; default: <b>name</b></td>
         <td>Trap named sysName.</td>
         <td>Trap named sysName.</td>
     </tr>
     </tr>
</table>
</table>
==SNMP v3 users==
==SNMP v3 users==


The <b>SNMP v3 users</b> page is used to create and manage users, who can be authenticated using SNMP v3.  
The <b>SNMP v3 users</b> page is used to create and manage users, who can be authenticated using SNMP v3. To configure an SNMP user, you must first create it:
Create a User by simply writing a name and pressing '''Add''' button.


[[File:Networking rutx manual snmp users v2.png|border|class=tlt-border]]
<ol>
    <li>Enter a custom name for the new user in the 'Name' field.</li>
    <li>Click the 'Add' button.</li>
    <li>Click the 'Edit' button next to the newly created user.</li>
</ol>
[[File:Networking_rutos_manual_snmp_snmp_v3_users_add_button.png|border|class=tlt-border]]
----
The SNMP user configuration window should look like this:


You can modify User settings by pressing [[File:Networking_rutx_manual_edit_button_v1.png]] '''Edit''' button.
[[File:Networking_rutos_manual_snmp_snmp_v3_users_snmp_user_configuration.png|border|class=tlt-border]]


[[File:Networking rutx manual snmp user edit v2.png|border|class=tlt-border]]<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
         <th>field name</th>
         <th>Field</th>
         <th>value</th>
         <th>Value</th>
         <th>description</th>
         <th>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Enable </td>
         <td>Enable </td>
         <td>off | on; default: '''off'''</td>
         <td>off | on; default: <b>off</b></td>
         <td>Enable or disable user.</td>
         <td>Turns this SNMP user on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 142: Line 150:
     <tr>
     <tr>
         <td><span style="color:blue">Authentication, no privacy </span>{{!}} <span style="color:red">Authentication and privacy:</span> Authentication passphrase</td>
         <td><span style="color:blue">Authentication, no privacy </span>{{!}} <span style="color:red">Authentication and privacy:</span> Authentication passphrase</td>
         <td>string; default: '''none'''</td>
         <td>string; default: <b>none</b></td>
         <td>Set authentication passpharse to generate key for SNMP v3.</td>
         <td>Set authentication passpharse to generate key for SNMP v3.</td>
     </tr>
     </tr>
Line 152: Line 160:
     <tr>
     <tr>
         <td><span style="color:red">Authentication and privacy:</span> Privacy passphrase</td>
         <td><span style="color:red">Authentication and privacy:</span> Privacy passphrase</td>
         <td>string; default: '''none'''</td>
         <td>string; default: <b>none</b></td>
         <td>Set privacy passpharse to generate key for SNMP v3.</td>
         <td>Set privacy passpharse to generate key for SNMP v3.</td>
     </tr>
     </tr>
Line 162: Line 170:
     <tr>
     <tr>
         <td>MIB subtree</td>
         <td>MIB subtree</td>
         <td>string; default: '''none'''</td>
         <td>string; default: <b>none</b></td>
         <td>Leave empty to access full MIB tree.</td>
         <td>Leave empty to access full MIB tree.</td>
     </tr>
     </tr>
Line 171: Line 179:
==Communities==
==Communities==


In SNMP community page you can manage access rights.
The <b>SNMP Community</b> section is used to manage access rights. You can edit an SNMP community by clicking the 'Edit' button next to it:
 
[[File:Networking_rutos_manual_snmp_communities_edit_button.png|border|class=tlt-border]]


[[File:Networking rutx manual snmp community v2.png|border|class=tlt-border]]
This will redirect you to the community's configuration page.


You can access SNMP community settings by pressing [[File:Networking_rutx_manual_edit_button_v1.png]] '''Edit''' button.
[[File:File:Networking_rutos_manual_snmp_communities_snmp_community_configuration.png|border|class=tlt-border]]


[[File:Networking rutx manual snmp community edit v2.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
         <th>field name</th>
         <th>Field</th>
         <th>value</th>
         <th>Value</th>
         <th>description</th>
         <th>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
Line 201: Line 210:
     <tr>
     <tr>
         <td>Access Mode</td>
         <td>Access Mode</td>
         <td>Read-Only | Read-Write; default: '''Read-Only'''</td>
         <td>Read-Only | Read-Write; default: <b>Read-Only</b></td>
         <td>Access mode for current community.</td>
         <td>Access mode for current community.</td>
     </tr>
     </tr>
</table>
</table>
==Trap settings==
==Trap settings==


SNMP Traps are used to send alert messages to a central collector, the “SNMP manager” when an important event happens. A
SNMP Traps are used to send alert messages to a central collector, the “SNMP manager” when an important event happens. A benefit of using Traps for reporting alarms is that they trigger instantaneously, rather than waiting for a status request from the manager.
benefit of using Traps for reporting alarms is that they trigger instantaneously, rather than waiting for a status
request from the manager.


Trap settings page is divided in two sections - <b>Trap service settings</b> and <b>Trap rules</b>. Trap service settings  
Trap settings page is divided in two sections - <b>Trap service settings</b> and <b>Trap rules</b>. Trap service settings  
Line 216: Line 224:
[[File:Networking rutx manual snmp trap settings v1.png|border|class=tlt-border]]
[[File:Networking rutx manual snmp trap settings v1.png|border|class=tlt-border]]


===Configure Trap Service Settings===
===Trap Service Settings===
----
----
To add another host click the 'Add' button at the right side of this table.
[[File:Networking_rutos_manual_snmp_trap_settings_trap_service_settings_add_button.png|border|class=tlt-border]]


To add another host click '''Add''' button at the right side of this table.
The newly added Host configuration should look like this:


[[File:Networking rutx manual snmp trap settings trap service v1.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_snmp_trap_settings_trap_service_settings_configuration.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
         <th>field name</th>
         <th>Field</th>
         <th>value</th>
         <th>Value</th>
         <th>description</th>
         <th>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
Line 236: Line 247:
     <tr>
     <tr>
         <td>Port</td>
         <td>Port</td>
         <td>integer [0..65535]; default: '''162'''</td>
         <td>integer [0..65535]; default: <b>162</b></td>
         <td>Port for trap's host.</td>
         <td>Trap host's port number.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 246: Line 257:
</table>
</table>


===Configure Trap Rules===
===Trap Rules===
----
----
You can create a new trap rule by clicking the 'Add' button.
[[File:Networking_rutos_manual_snmp_trap_settings_trap_rules_add_button.png|border|class=tlt-border]]
You can then edit the trap rule by clicking the 'Edit' button next to it.
[[File:Networking_rutos_manual_snmp_trap_settings_trap_rules_edit_button.png|borde|class=tlt-border]]
You should be redirected to the rule's configuration page which should look something like this:


You can edit Trap rule by pressing [[File:Networking_rutx_manual_edit_button_v1.png]] '''Edit''' button in <b>Trap settings</b> page on preferred rule.
[[File:Networking_rutos_manual_snmp_trap_settings_trap_rules_modify_trap_rule_mobile_{{{mobile}}}.png|border|class=tlt-border]]


{{#ifeq:{{{mobile}}}|0|
Above is an example of what rule configuration window looks like. Below is a table with detailed explanations on how to configure the rule and what each of the fields mean.  
[[File:Networking rutx10 manual snmp trap settings trap rule edit v1.png|border|class=tlt-border]] <!--rutx no mobile-->
|
[[File:Networking rutx manual snmp trap settings trap rule edit v1.png|border|class=tlt-border]] <!--rutx mobile-->
}}


Above is an example of what rule configuration window looks like.
To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.
Below is a table with detailed explanations on how to configure the rule and what each of the fields mean.
To avoid redundancy, screenshots for the other rules will not be provided, since the structures,  
syntax and the overall look of the configuration windows for each rule are very similar.  
Instead, only tables containing information on how to edit each rule will be provided.


====Signal strength====
====Signal strength====
Line 267: Line 279:
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
         <th>field name</th>
         <th>Field</th>
         <th>value</th>
         <th>Value</th>
         <th>description</th>
         <th>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Enable</td>
         <td>Enable</td>
         <td>off | on; default: '''on'''</td>
         <td>off | on; default: <b>on</b></td>
         <td>Enable or disable this rule.</td>
         <td>Enable or disable this rule.</td>
     </tr>
     </tr>
Line 287: Line 299:
     </tr>
     </tr>
</table>
</table>
 
<br>
 
====Connection type====
====Connection type====
----
----
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
         <th>field name</th>
         <th>Field</th>
         <th>value</th>
         <th>Value</th>
         <th>description</th>
         <th>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Enable</td>
         <td>Enable</td>
         <td>off | on; default: '''on'''</td>
         <td>off | on; default: <b>on</b></td>
         <td>Enable or disable this rule.</td>
         <td>Enable or disable this rule.</td>
     </tr>
     </tr>
Line 309: Line 320:
     </tr>
     </tr>
</table>
</table>
 
<br>
 
====Input/Output====
====Input/Output====
----
----
Line 321: Line 331:
     <tr>
     <tr>
         <td>Enable</td>
         <td>Enable</td>
         <td>off | on; default: '''on'''</td>
         <td>off | on; default: <b>on</b></td>
         <td>Enable or disable this rule.</td>
         <td>Enable or disable this rule.</td>
     </tr>
     </tr>
Line 346: Line 356:
         <td>On which Input/Output state will this rule be triggered.</td>
         <td>On which Input/Output state will this rule be triggered.</td>
     </tr>
     </tr>
|TRB2XX =
|TRB2 =
     <tr>
     <tr>
         <td>Input/Output type</td>
         <td>Input/Output type</td>
Line 372: Line 382:
         <td>At which voltage value will this rule be triggered.</td>
         <td>At which voltage value will this rule be triggered.</td>
     </tr>
     </tr>
|TRB14X =
|TRB1 =
     {{#ifeq:{{{name}}}|TRB141|
     {{#ifeq:{{{name}}}|TRB141|
         <tr>
         <tr>
Line 430: Line 440:
         </tr>
         </tr>
     |
     |
        <tr>
            <td>Input/Output type</td>
            <td>Input/Output; default: <b>Input/Output</b></td>
            <td>Which type of Inputs and Outputs to use in this rule.</td>
        </tr>
        <tr>
            <td>Input/Output name</td>
            <td>Input(3) {{!}} Output(4); default: <b>Input(3)</b></td>
            <td>Which type of Inputs and Outputs to use in this rule.</td>
        </tr>
        <tr>
            <td>State change</td>
            <td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
            <td>On which Input/Output state will this rule be triggered.</td>
        </tr>
|RUT3 =
         <tr>
         <tr>
             <td>Input/Output type</td>
             <td>Input/Output type</td>
Line 450: Line 476:
</table>
</table>


== SNMP Variables list ==
==SNMP variables list==
 
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
         <th style="width: 250px">NAME</th>
         <th style="width: 250px">Name</th>
         <th style="width: 250px">OID</th>
         <th style="width: 250px">OID</th>
         <th style="width: 579px">DESCRIPTION</th>
         <th style="width: 579px">Description</th>
     </tr>
     </tr>
     <tr>
     <tr>

Revision as of 11:45, 24 August 2020

Template:Networking rutos manual fw disclosure

Summary

Simple Network Management Protocol (SNMP) is a network management protocol used for collecting information and configuring network devices. This page is an overview of the SNMP function in {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

SNMP settings

The SNMP settings page is used to configure SNMP accessibility and general SNMP information for your device.

SNMP agent settings

Field Value Description
Enable SNMP service off | on; default: off Run SNMP service on system's startup.
Enable remote access off | on; default: off Open port in firewall so that SNMP service may be reached from WAN.
Protocol UDP | TCP; default: UDP SNMP service's protocol.
Port integer [0..65535]; default: 161 SNMP service's port.
SNMP v1 Mode off | on; default: on Enable/disable SNMP v1 Mode.
SNMP v2c Mode off | on; default: on Enable/disable SNMP v2c Mode.
SNMP v3 Mode off | on; default: off Enable/disable SNMP v3 Mode.

SNMP System Summary

The <b<SNMP System Summary section contains general information about SNMP on this device. You can also download this device's MIB file from this section.

Field Value Description
MIB file -(interactive button) Downloads the device's MIB file.
System OID 1.3.6.1.4.1.48690 OID or Object Identifier, is an identifier used to name and point to an object in the MIB hierarchy.
Location string; default: location Trap named sysLocation.
Contact string; default: [email protected] Trap named sysContact.
Name string; default: name Trap named sysName.

SNMP v3 users

The SNMP v3 users page is used to create and manage users, who can be authenticated using SNMP v3. To configure an SNMP user, you must first create it:

  1. Enter a custom name for the new user in the 'Name' field.
  2. Click the 'Add' button.
  3. Click the 'Edit' button next to the newly created user.

The SNMP user configuration window should look like this:

Field Value Description
Enable off | on; default: off Turns this SNMP user on or off.
Username string; default: none Set username to access SNMP.
Security level No authentication, no privacy | Authentication, no privacy | Authentication and privacy; default: No authentication, no privacy A security level is an authentication strategy that is set up for the user.

No authentication, no privacy - authenticates with a username. Authentication - provides MD5 or SHA algorithms for authentication.

Privacy - Provides DES or AES encryption.
Authentication, no privacy | Authentication and privacy: Authentication type SHA | MD5; default: SHA Set authentication type to use with SNMP v3.
Authentication, no privacy | Authentication and privacy: Authentication passphrase string; default: none Set authentication passpharse to generate key for SNMP v3.
Authentication and privacy: Privacy type DES | AES; default: DES Set privacy type to use with SNMP v3.
Authentication and privacy: Privacy passphrase string; default: none Set privacy passpharse to generate key for SNMP v3.
Access Mode Read-Only | Read-Write; default: Read-Only The access mode specifies the access the hosts in the community are allowed with respect to retrieving and modifying the MIB variables from a specific SNMP agent.
MIB subtree string; default: none Leave empty to access full MIB tree.

Note: this table has coloring scheme to indicate which fields can be seen with different configuration.

Communities

The SNMP Community section is used to manage access rights. You can edit an SNMP community by clicking the 'Edit' button next to it:

This will redirect you to the community's configuration page.

File:File:Networking rutos manual snmp communities snmp community configuration.png

Field Value Description
Community name string; default: none Name of the community.
IP Address ip; default: none IP address of the community.
IP Mask ip; default: none Netmask for IP of the community.
Access Mode Read-Only | Read-Write; default: Read-Only Access mode for current community.

Trap settings

SNMP Traps are used to send alert messages to a central collector, the “SNMP manager” when an important event happens. A benefit of using Traps for reporting alarms is that they trigger instantaneously, rather than waiting for a status request from the manager.

Trap settings page is divided in two sections - Trap service settings and Trap rules. Trap service settings lets you manage hosts which will get configured alert messages, Trap rules lets you manage rules which when triggered will send alerts.

File:Networking rutx manual snmp trap settings v1.png

Trap Service Settings

To add another host click the 'Add' button at the right side of this table.

The newly added Host configuration should look like this:

Field Value Description
Host/IP url | ip; default: none Host to transfer SNMP traffic to.
Port integer [0..65535]; default: 162 Trap host's port number.
Community string; default: Public Community name.

Trap Rules

You can create a new trap rule by clicking the 'Add' button.

You can then edit the trap rule by clicking the 'Edit' button next to it.

borde

You should be redirected to the rule's configuration page which should look something like this:

[[File:Networking_rutos_manual_snmp_trap_settings_trap_rules_modify_trap_rule_mobile_{{{mobile}}}.png|border|class=tlt-border]]

Above is an example of what rule configuration window looks like. Below is a table with detailed explanations on how to configure the rule and what each of the fields mean.

To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.

Signal strength

Field Value Description
Enable off | on; default: on Enable or disable this rule.
Action Signal strength trap Rule will be triggered if signal strength falls below specified number.
Signal strength integer [-130..0]; default: none GSM signal's strength value in dBm, e.g. -85


Connection type

Field Value Description
Enable off | on; default: on Enable or disable this rule.
Action Connection type trap Rule will be triggered when connection type will change.


Input/Output

field name value description
Enable off | on; default: on Enable or disable this rule.
Action Input/Output trap Rule will be triggered when specified input or output state will change.

SNMP variables list

Name OID Description
ModemImei.0 .1.3.6.1.4.1.48690.1.1.0 Modem IMEI
ModemModel.0 .1.3.6.1.4.1.48690.1.2.0 Modem model
ModemManufacturer.0 .1.3.6.1.4.1.48690.1.3.0 Modem manufacturer
ModemRevision.0 .1.3.6.1.4.1.48690.1.4.0 Modem revision
ModemSerial.0 .1.3.6.1.4.1.48690.1.5.0 Modem serial number
Imsi.0 .1.3.6.1.4.1.48690.1.6.0 Modem IMSI
RouterName.0 .1.3.6.1.4.1.48690.1.7.0 Router's name
ProductCode.0 .1.3.6.1.4.1.48690.1.8.0 Router's Product code
BatchNumber.0 .1.3.6.1.4.1.48690.1.9.0 Router's batch number
HardwareRevision.0 .1.3.6.1.4.1.48690.1.10.0 Router's Hardware Revision number
SimState.0 .1.3.6.1.4.1.48690.2.1.0 SIM card status
PinState.0 .1.3.6.1.4.1.48690.2.2.0 PIN status
NetState.0 .1.3.6.1.4.1.48690.2.3.0 Mobile network registration status
Signal.0 .1.3.6.1.4.1.48690.2.4.0 Signal strength level
Operator.0 .1.3.6.1.4.1.48690.2.5.0 Operator currently in use
OperatorNumber.0 .1.3.6.1.4.1.48690.2.6.0 Operator number (MCC+MNC)
ConnectionState.0 .1.3.6.1.4.1.48690.2.7.0 Data session connection state
ConnectionType.0 .1.3.6.1.4.1.48690.2.8.0 Data session connection type
Temperature.0 .1.3.6.1.4.1.48690.2.9.0 Modem's temperature in 0.1 degrees Celsius
ReceivedToday.0 .1.3.6.1.4.1.48690.2.10.0 Tee current day's RX packet count
SentToday.0 .1.3.6.1.4.1.48690.2.11.0 The current day's TX packet count
ReceivedYesterday.0 .1.3.6.1.4.1.48690.2.12.0 Yesterday's RX packet count
SentYesterday.0 .1.3.6.1.4.1.48690.2.13.0 Yesterday's TX packet count
FirmwareVersion.0 .1.3.6.1.4.1.48690.2.14.0 Router's Firmware version
SimSlot.0 .1.3.6.1.4.1.48690.2.15.0 SIM slot currently in use
RouterUptime.0 .1.3.6.1.4.1.48690.2.16.0 Router up-time in seconds
ConnectionUptime.0 .1.3.6.1.4.1.48690.2.17.0 Mobile connection up-time in seconds
MobileIP.0 .1.3.6.1.4.1.48690.2.18.0 IP address of the mobile interface
Sent.0 .1.3.6.1.4.1.48690.2.19.0 The amount of data sent through the mobile interface
Received.0 .1.3.6.1.4.1.48690.2.20.0 The amount of data received through the mobile interface
CellID.0 .1.3.6.1.4.1.48690.2.21.0 ID of the current mobile operator's cell
SINR.0 .1.3.6.1.4.1.48690.2.22.0 SINR value in dB
RSRP.0 .1.3.6.1.4.1.48690.2.23.0 RSRP value in dBm
RSRQ.0 .1.3.6.1.4.1.48690.2.24.0 RSRQ value in dB
hotSpotId.0 .1.3.6.1.4.1.48690.3.4.1.0 Hotspot ID
hotSpotSsid.0 .1.3.6.1.4.1.48690.3.4.2.0 Hotspot SSID
hotSpotEnableState.0 .1.3.6.1.4.1.48690.3.4.3.0 Hotspot status (enabled or disabled)
hotSpotIP.0 .1.3.6.1.4.1.48690.3.4.4.0 Hotspot interface IP address
hotSpotDownloadBandWidth.0 .1.3.6.1.4.1.48690.3.4.5.0 Hotspot download bandwidth
hotSpotUploadBandWidth.0 .1.3.6.1.4.1.48690.3.4.6.0 Hotspot upload bandwidth
hotSpotUsers.0 .1.3.6.1.4.1.48690.3.4.7.0 Hotspot users list
hotSpotUsersPass.0 .1.3.6.1.4.1.48690.3.4.8.0 Hotspot users password list
hotSpotUsersActive.0 .1.3.6.1.4.1.48690.3.4.9.0 List of active Hotspot users
hotSpotUsersMac.0 .1.3.6.1.4.1.48690.3.4.10.0 Hotspot users MAC address list
hotSpotUsersIp.0 .1.3.6.1.4.1.48690.3.4.11.0 Hotspot users IP address list
hotSpotUsersStartTime.0 .1.3.6.1.4.1.48690.3.4.12.0 Hotspot users log in time list
hotSpotUsersUseTime.0 .1.3.6.1.4.1.48690.3.4.13.0 Hotspot users log in up-time list
hotSpotUsersDownload .0.1.3.6.1.4.1.48690.3.4.14.0 Hotspot users downloaded data count
hotSpotUsersUpload.0 .1.3.6.1.4.1.48690.3.4.15.0 Hotspot users uploaded data count
hotSpotEndTime.0 .1.3.6.1.4.1.48690.3.4.16.0 Hotspot
DigitalInput.0 .1.3.6.1.4.1.48690.5.1.0 Digital input state
DigitalIsolatedInput.0 .1.3.6.1.4.1.48690.5.2.0 Digital isolated input state
AnalogInput.0 .1.3.6.1.4.1.48690.5.3.0 Analog input state
DigitalOCOutput.0 .1.3.6.1.4.1.48690.5.4.0 Digital OC output state
DigitalRelayOutput.0 .1.3.6.1.4.1.48690.5.5.0 Digital Relay output state
AnalogInputCalc.0 .1.3.6.1.4.1.48690.5.6.0 Analog input value
Longtitude.0 .1.3.6.1.4.1.48690.6.1.0 GPS Longitude value
Latitude.0 .1.3.6.1.4.1.48690.6.2.0 GPS Latitude value
Accuracy.0 .1.3.6.1.4.1.48690.6.3.0 GPS coordinate accuracy
Datetime.0 .1.3.6.1.4.1.48690.6.4.0 GPS coordinate fix time
NumSatellites.0 .1.3.6.1.4.1.48690.6.5.0 Number of GPS satelites

[[Category:{{{name}}} Services section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_snmp&oldid=69516"