Jump to content
  • EN

Template:Networking rutos configuration example guest wifi: Difference between revisions

← Older editNewer edit →
VisualWikitext
Line 224: Line 224:
If you've followed all the steps presented above, your configuration should be finished. If you are near a RUT, that is, in a wireless zone, turn on WiFi on your device and view the available networks. You should see the available SSID - "RUTX_WiFi_2G" and "Guest_WiFi". Select one of them and enter the appropriate WiFi password.
If you've followed all the steps presented above, your configuration should be finished. If you are near a RUT, that is, in a wireless zone, turn on WiFi on your device and view the available networks. You should see the available SSID - "RUTX_WiFi_2G" and "Guest_WiFi". Select one of them and enter the appropriate WiFi password.


Wireless users connected to SSID: “'''RUTX_WIFI'''”, will be assign to “LAN”, and will get IP from main pool '''192.168.1.0/24'''.
 


Wireless users connected to SSID: “'''GUEST'S_WIFI'''”, will be assign to LAN “Guest”, and will get IP from new pool '''10.10.10.0/24'''.
Wireless users connected to SSID: “'''GUEST'S_WIFI'''”, will be assign to LAN “Guest”, and will get IP from new pool '''10.10.10.0/24'''.


Guest hosts are unable to access any data from pool 192.168.1.0/24.
 


-----
-----
Line 234: Line 234:
<table class="nd-othertables_2">
<table class="nd-othertables_2">
     <tr>
     <tr>
         <th width=525; style="border-bottom: 1px solid white;></th>
         <th width=525; style="border-bottom: 1px solid white;"></th>
         <th width=620; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking rutos configuration examples guest wifi 14 v1.jpg|border|class=tlt-border|300px|center]]</th>
         <th width=620; style="border-bottom: 1px solid white;" rowspan=2>
[[File:Networking rutos configuration examples guest wifi 14 v1.jpg|border|class=tlt-border|300px|center]]</th>
    </tr>
    <tr>
        <td style="border-bottom: 1px solid white>
Wireless users connected to SSID: “'''RUTX_WIFI'''”, will be assign to “LAN”, and will get IP from main pool '''192.168.1.0/24'''.
        </td>
     </tr>
     </tr>
</table>
----
<table class="nd-othertables_2">
     <tr>
     <tr>
         <th width=525; style="border-bottom: 1px solid white;></th>
         <th width=525; style="border-bottom: 1px solid white;"></th>
         <th width=620; style="border-bottom: 1px solid white;" rowspan=3>[[File:Networking rutos configuration examples guest wifi 13 v1.jpg|border|class=tlt-border|300px|center]]</th>
         <th width=620; style="border-bottom: 1px solid white;" rowspan=2>
[[File:Networking rutos configuration examples guest wifi 13 v1.jpg|border|class=tlt-border|300px|center]]</th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td style="border-bottom: 1px solid white>
         <td style="border-bottom: 1px solid white>
Remote office should now be able to access HQ network resources. To verify the connection you can ping remote RUTX (HQ server) LAN IP and if you get a reply, you have successfully connected to HQ‘s internal network. Also, all LAN addresses, that belong to the work network (192.168.1.0/24), should now be leased to LAN devices by HQ router.
Guest hosts are unable to access any data from pool 192.168.1.0/24.
        <ol>
            <li></li>
            <li></li>
            <li></li>
            <li></li>
        </ol>
         </td>
         </td>
     </tr>
     </tr>
Line 249: Line 267:


----
----
<table class="nd-othertables_2">
    <tr>
        <th width=525; style="border-bottom: 1px solid white;"></th>
        <th width=620; style="border-bottom: 1px solid white;" rowspan=2>
[[File:Networking_rutos_configuration_example_l2tp_over_ipsec_android_7_v3.png|border|class=tlt-border|300px|center]]</th>
    </tr>
    <tr>
        <td style="border-bottom: 1px solid white>
        <ol>
            <li>Write the '''DNS servers''' you are planning to use (in this example we used google DNS servers).</li>
            <li>Add '''Forwarding routes''' (RUTX LAN network).</li>
            <li>'''Save''' settings.</li>
        </ol>
        </td>
    </tr>
</table>
----
<table class="nd-othertables_2">
<table class="nd-othertables_2">
     <tr>
     <tr>
         <th width=300; style="border-bottom: 1px solid white;></th>
         <th width=525; style="border-bottom: 1px solid white;"></th>
         <th width=700; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking_rutos_configuration_example_openvpn_bridge_use_case_19_v2.png|border|class=tlt-border|628px|right]]</th>
         <th width=620; style="border-bottom: 1px solid white;" rowspan=2>
[[File:Networking_rutos_configuration_example_l2tp_over_ipsec_android_8_v2.png|border|class=tlt-border|300px|center]]</th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td style="border-bottom: 1px solid white>
         <td style="border-bottom: 1px solid white>
In order to check the guest WiFi, you simply need to connect to the newly created WiFi AP, then check whether you have internet connectivity and try to ping OpenVPN server LAN IP - if everything is set up correctly, you should not be able to do that.  
Now open your newly created VPN instance and connect to it:
        <ol>
            <li>Write the '''Username''' you created in router's L2TP settings.</li>
            <li>Write the '''Password''' you created in router's L2TP settings.</li>
            <li>Press '''Connect'''.</li>
        </ol>
         </td>
         </td>
     </tr>
     </tr>
</table>
</table>
Retrieved from "https://wiki.teltonika-networks.com/view/Template:Networking_rutos_configuration_example_guest_wifi"