Template:Networking rutos manual wan: Difference between revisions
No edit summary |
No edit summary |
||
| Line 362: | Line 362: | ||
The <b>General Setup</b> section is used to configure the main parameters of a mobile WAN connection. | The <b>General Setup</b> section is used to configure the main parameters of a mobile WAN connection. | ||
[[File:Networking_{{lc:{{{series | [[File:Networking_{{lc:{{{series}}}}}_manual_wan_mobile_configuration_general_setup_v1.png|border|class=tlt-border]] | ||
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Revision as of 07:43, 18 August 2020
Template:Networking rutos manual fw disclosure
Summary
The WAN page is used to to set up WAN network interfaces, which are used to connect device with external networks.
This manual page provides an overview of the WAN windows in {{{name}}} devices.
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.
WAN
The WAN section displays WAN network interfaces currently existing on this device.
[[File:Networking_{{{series}}}_manual_wan.png|border|class=tlt-border]]
From here you can turn the interfaces on or off, change their priority* or enter an interface's configuration page.
* You can change the priority by dragging and dropping an interface to another position. Moving an interface changes its metric value in the configuration file. Interfaces that are higher on the list have greater priority.
Interface configuration
This section provides information on WAN interface configuration. There is one type of WAN interface on the device:
To begin configuring an interface, click the 'Edit' button on the right side of the interface:
[[Category:{{{name}}} Network section]]