Template:Networking rutos manual leds: Difference between revisions

Revision as of 10:31, 31 August 2020

This page contains information the different types of LEDs and their behaviour on a {{{name}}} device.

Power LED

The power LED is located on the bottom left corner of the front panel, just under the power connector.

[[File:Networking_{{{name}}}_manual_leds_power_led.png|400px]]

It indicates whether the device is powered on or not.

State	Description
M LED turned on	Device is powered over the Main power connector.
M LED turned off	Device is not powered over the Main power connector..
R LED turned on	Device is powered over the Reserve power connector.
R LED turned off	Device is not powered over the Reserve power connector.

Ethernet port LEDs

There are two LEDs located at the top of each Ethernet port.

[[File:Networking_{{{name}}}_manual_leds_ethernet_leds.png|400px]]

They provide information on the current states of the Ethernet ports. Each port has two LEDs:

Orange - 10/100 Mbps connection
Green - 1000 Mbps connection

Below is an explanation on the behaviours of green and orange LEDs.

State	Description
LED on	A data connection on the port is operational (cable plugged in, end device visible, no data is being transferred).
LED off	No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card)).
LED blinking	Connection established and data is being transferred over this port.

[[Category:{{{name}}} Manual]]

@@ Line 13: / Line 13: @@
          <th width=500>State</th>
          <th width=500>Description</th>
-     </tr>
+     </tr>{{#ifeq: {{{power_leds}}} | 1 |
      <tr>
          <td>LED turned on</td>
@@ Line 21: / Line 21: @@
          <td>LED turned off</td>
          <td>Device is not powered on.</td>
+    </tr>|
+    <tr>
+        <td>M LED turned on</td>
+        <td>Device is powered over the Main power connector.</td>
+    </tr>
+    <tr>
+        <td>M LED turned off</td>
+        <td>Device is not powered over the Main power connector..</td>
      </tr>
+    <tr>
+        <td>R LED turned on</td>
+        <td>Device is powered over the Reserve power connector.</td>
+    </tr>
+    <tr>
+        <td>R LED turned off</td>
+        <td>Device is not powered over the Reserve power connector.</td>
+    </tr>}}
 </table>{{#ifeq: {{{wifi}}} | 1 |
 <h2>WiFi band LEDs</h2>
@@ Line 162: / Line 178: @@
 <h2>Mobile network type LEDs</h2>
-The <b>mobile network type LEDs</b> are located just above the {{{type_sim}}} holder.
+The <b>mobile network type LEDs</b> are located near the SIM card holder.
 [[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|400px]]
@@ Line 201: / Line 217: @@
 ==Mobile signal strength indication LEDs==
-The <b>mobile signal strength indication LEDs</b> are located just above the {{{strength_sim}}} holder.
+The <b>mobile signal strength indication LEDs</b> are located near the SIM card holder.
 [[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_signal_strength_leds.png|400px]]