Template:Networking rutos manual leds

This page contains information the different types of LEDs and their behaviour on a {{{name}}} device.

Power LED

The power LED is located on the bottom left corner of the front panel, just under the power connector.

[[File:Networking_{{{name}}}_manual_leds_power_led.png|400px]]

It indicates whether the device is powered on or not.

State	Description
M LED turned on	Device is powered over the Main power connector.
M LED turned off	Device is not powered over the Main power connector..
R LED turned on	Device is powered over the Reserve power connector.
R LED turned off	Device is not powered over the Reserve power connector.

Ethernet port LEDs

There are two LEDs located at the top of each Ethernet port.

[[File:Networking_{{{name}}}_manual_leds_ethernet_leds.png|400px]]

They provide information on the current states of the Ethernet ports. Each port has two LEDs:

• Orange - 10/100 Mbps connection
• Green - 1000 Mbps connection

Below is an explanation on the behaviours of green and orange LEDs.

State	Description
LED on	A data connection on the port is operational (cable plugged in, end device visible, no data is being transferred).
LED off	No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card)).
LED blinking	Connection established and data is being transferred over this port.

[[Category:{{{name}}} Manual]]