Template:Networking rutos manual input output

Summary

Inputs and outputs are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events. This chapter is an overview of the Input/Output section for {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Status

The Status page displays the current states of the device input and output:

File:Networking rutx manual input output status v2.png

You can invert Input pin by clicking on slider in Inversion column and switch Output pin state by clicking on slider in State column.

Status from command line

---

You can also obtain the status of the input or output from the command line. List of ubus possible values in {{{name}}} devices:

ioman.gpio.din1
ioman.gpio.dout1

Call command ubus call value status :

root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.dout1 status
{
        "value": "0",
        "direction": "in",
        "bi_dir": false,
        "invert_input": false
}

• din1 is the input:
  • "value": "0" means low level state.
  • "value": "1" means high level state.
• dout1 is the output:
  • "value": "0" means low level state.
  • "value": "1" means high level state.

Post/Get

Enabling Post/Get will allow you to send HTTP POST/GET requests to device which controls the state of the output. The figure below is an example of the Post/Get configuration section and the table below provides information on the fields contained in that section:

File:Networking rutx manual input output post get v2.png

Field	Value	Description
Enable	off | on; default: off	Turns Post/Get on or off.
Username	string; default: none	Username used for authentication in POST/GET queries.
Password	string; default: none	Password used for authentication in POST/GET queries.
Confirm password	string; default: none	Repeat the new password.

Post/Get examples

---

It is possible to turn the output on and off by using a valid HTTP POST/GET syntax. Use a web browser or any other compatible software to submit HTTP POST/GET strings to the device.

Below is a table containing syntax examples of this usage:

Action	POST/GET URL
Turn Output state to high	http://192.168.1.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=on
Turn Output state to low after 5 seconds for 3 seconds	http://192.168.1.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=on&delay=5&time=3

Overview:

• 192.168.1.1 - device default LAN IP address; replace it in accordance with your own configuration.
• username - login name from Post/Get configuration.
• password- password from Post/Get configuration.
• state - turn Output on or off.
• delay - defines a delay (in seconds) after which the specified action will be performed.
• time - defines a window of time during which the action will take place. For instance, if you post an on action while specifying time=5, the output will turn on and stay on for 5 seconds before turning off.

Delay and time parameters can be used together. For example, if delay is 10, time is 5, action is on, then 10 seconds after the execution of the command, the output will switch to on (or stay in on state if it was already that way), then after 5 more seconds it will switch to off state. In this case the overall command execution time is 15 seconds.

---

To use Post/Get via SSH instead of a browser, you may want to use the curl -X command. Simply add the same URL command in between quotes and specify the HTTP method.

Examples:

• Switch output to High:
  

  curl -X GET "http://192.168.1.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=on"

• Switch output to Low after delay:
  

  curl -X GET "http://192.168.1.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=off&delay=5"

Scheduler

With the help of the output Scheduler you can configure a timetable of when the output should be enabled or disabled based on date and time. By default everything is unset.

I/O juggler

The I/O juggler page is used create automated actions based on Input state and conditions.

General

---

The General section allows you to create automated Actions based on selected Inputs and their trigger state. The figure below is an example of Conditions section.

Modify Input configuration

---

You can find explanation about fields in the table below this illustration.

Field	Value	Description
Enabled	off | on; default: off	Changes current profile to specified one when action triggers.
Trigger interval	positive integer; default: none	Specifies what is the shortest amount of seconds between triggers.
Trigger	Rising | Falling | Both; default: Rising	Specifies on which trigger state this rule will be activated.
Add actions	actions; default: none	Specifies actions which have to be met for rule to be executed. Actions are optional.
Add conditions	conditions; default: none	Specifies conditions which have to be met for action to occur. Conditions are optional.

Actions

---

The Actions section lets you manage your created Actions for I/O Juggler inputs. The figure below is an example of Actions section.

Modify action

---

Above is an example of what action configuration window looks like. Below is a table with detailed explanations on how to configure the action and what each of the fields mean. To avoid redundancy, screenshots for the other actions will not be provided, since the structures, syntax and the overall look of the configuration windows for each action are very similar. Instead, only tables containing information on how to edit each action will be provided.

Profile

---

Field	Value	Description
Type	Profile	Changes current profile to specified one when action triggers.
Execution delay	positive integer; default: none	How many seconds will pass before the action is excecuted after it's triggered.
Profile	profile; default: default	Choose a profile that will be applied when the action triggers.
Add conditions	conditions; default: none	Specifies conditions which have to be met for action to occur. Conditions are optional.

Email

---

Field	Value	Description
Type	Email	Sends email when action triggers.
Subject	string; default: none	Subject of email.
Text message	string; default: none	Text message to be sent in email. Below this field you can find device information and their codes, which can be included in messages to send device information.
Execution delay	positive integer; default: none	How many seconds will pass before the action is excecuted after it's triggered.
Email user	email user; default: none	Configured email user.
Recipient's email address	string; default: none	Email receiver(s).
Add conditions	conditions; default: none	Specifies conditions which have to be met for action to occur. Conditions are optional.

SMS

---

Field	Value	Description
Type	SMS	Sends sms when action triggers.
Text message	string; default: none	Text message to be sent in sms. Below this field you can find device information and their codes, which can be included in messages to send device information.
Execution delay	positive integer; default: none	How many seconds will pass before the action is excecuted after it's triggered.
Recipients	Single number | Group; default: Single number	How many recipients will get the message.
Single number: Recipient's phone number	number; default: none	SMS receiver.
Group: Phone group	phone group; default: none	SMS receivers.
Add conditions	conditions; default: none	Specifies conditions which have to be met for action to occur. Conditions are optional.

Note: this table has coloring scheme to indicate which fields can be seen with different configuration.

Output

---

Field	Value	Description
Type	Output	Changes Output state when action triggers.
Execution delay	positive integer; default: none	How many seconds will pass before the action is excecuted after it's triggered.
Control	output; default: Output(4)	Specifies the output of which the state will be changed.
Revert	integer; default: 0	After how many seconds the state will revert. If left 0 or empty the state will not revert.
Maintain	off | on; default: on	Maintain this IO state after reboot.
Invert	off | on; default: off	On action inverts pin state.
State copying	off | on; default: off	Copies the state from selected input to selected output.
State	High | Low; default: High	Specifies what state the output pin will be set to.
Add conditions	conditions; default: none	Specifies conditions which have to be met for action to occur. Conditions are optional.

HTTP

---

Field	Value	Description
Type	HTTP	Sends HTTP request when action triggers.
Execution delay	positive integer; default: none	How many seconds will pass before the action is excecuted after it's triggered.
Method	Get | Post; default: Get	Specifies the output of which the state will be changed.
URL	string; default: none	URL to send request to.
Verify	off | on; default: off	Verifies the validity of certificates, only works for https.
Parameters	string; default: none	Parameters and their value from device for usage in Post or Get requests. Possible values: Time stamp, UNIX time, WAN MAC, Wired WAN IP, Network info, Product code, LAN MAC address, LAN IP address, Serial number, Current FW version, Monitoring status, Input Name, Input state change trigger, RSCP, ECIO, SIM slot in use, CELLID, RSRQ, SINR, RSRP, SIM State, SIM pin state, Modem model, IMSI, Modem serial number , Network State, Data connection state, Connection type, Mobile IP, Operator name, Signal strenght, IMEI, ICCID, Neighbour cells, Network serving.
Add conditions	conditions; default: none	Specifies conditions which have to be met for action to occur. Conditions are optional.

Script

---

Field	Value	Description
Type	Script	Runs script when action triggers.
Execution delay	positive integer; default: none	How many seconds will pass before the action is excecuted after it's triggered.
Specify path	Upload a script | Specify path; default: Upload a cript	Selection to upload a script or specify its absolute path in device.
Upload a script: Custom script	-(interactive button)	Shows file upload window on click.
Specify path: Script file	string; default: none	Absolute path to script file in device.
Arguments	string; default: none	Optional arguments which can be provided for the script. You can include device information with values given below this input field.
Add conditions	conditions; default: none	Specifies conditions which have to be met for action to occur. Conditions are optional.

Note: this table has coloring scheme to indicate which fields can be seen with different configuration.

Reboot

---

Field	Value	Description
Type	Reboot	Reboots device when action triggers.
Execution delay	positive integer; default: none	How many seconds will pass before the action is excecuted after it's triggered.
Add conditions	conditions; default: none	Specifies conditions which have to be met for action to occur. Conditions are optional.

Change sim

---

Field	Value	Description
Type	Change sim	Changes active sim card when action triggers.
Execution delay	positive integer; default: none	How many seconds will pass before the action is excecuted after it's triggered.
Flip	off | on; default: off	Switches to a different sim card.
Off: Target	Sim1 | Sim2; default: Sim1	Switches to a selected sim card.
Add conditions	conditions; default: none	Specifies conditions which have to be met for action to occur. Conditions are optional.

Note: this table has coloring scheme to indicate which fields can be seen with different configuration.

Conditions

---

The Conditions section lets you manage your created Conditions for I/O Juggler Actions. The figure below is an example of Conditions section.

Modify condition

---

Above is an example of what condition configuration window looks like. Below is a table with detailed explanations on how to configure the condition and what each of the fields mean. To avoid redundancy, screenshots for the other conditions will not be provided, since the structures, syntax and the overall look of the configuration windows for each condition are very similar. Instead, only tables containing information on how to edit each condition will be provided.

Boolean group

---

Field	Value	Description
Condition type	Boolean group	A type of condition.
Boolean type	AND | NAND | OR | NOR; default: AND	Type of boolean condition.
Add conditions	conditions; default: none	Specifies conditions which have to be met for action to occur. Conditions are optional.

I/O

---

Field	Value	Description
Condition type	I/O	A type of condition.
I/O	inputs/outputs; default: Output(4)	Specifies the I/O to which the condition is listening to.
State	High | Low; default: High	Specifies in what state the pin has to be.

Minute

---

Field	Value	Description
Condition type	Minute	A type of condition.
Inverted function	off | on; default: off	Inverts the selected condition type. Makes the condition true if the time/date is outside the specified interval.
Interval	off | on; default: off	Switches between a specific value and a time interval.
Off: Minute	integer [0..59]; default: none	Specifies minute at which the action can occur.
On: Start minute	integer [0..59]; default: none	Specifies starting minute of the interval at which the action can occur.
On: End minute	integer [0..59]; default: none	Specifies ending minute of the interval at which the action can occur.

Note: this table has coloring scheme to indicate which fields can be seen with different configuration.

Hour

---

Field	Value	Description
Condition type	Hour	A type of condition.
Inverted function	off | on; default: off	Inverts the selected condition type. Makes the condition true if the time/date is outside the specified interval.
Interval	off | on; default: off	Switches between a specific value and a time interval.
Off: Hour	integer [0..59]; default: none	Specifies hour at which the action can occur.
On: Start hour	integer [0..59]; default: none	Specifies starting hour of the interval at which the action can occur.
On: End hour	integer [0..59]; default: none	Specifies ending hour of the interval at which the action can occur.

Note: this table has coloring scheme to indicate which fields can be seen with different configuration.

Weekday

---

Field	Value	Description
Condition type	Weekday	A type of condition.
Inverted function	off | on; default: off	Inverts the selected condition type. Makes the condition true if the time/date is outside the specified interval.
Interval	off | on; default: off	Switches between a specific value and a time interval.
Off: Weekday	weekday; default: Monday	Specifies weekday at which the action can occur.
On: Start weekday	weekday; default: Monday	Specifies starting weekday of the interval at which the action can occur.
On: End weekday	weekday; default: Monday	Specifies ending weekday of the interval at which the action can occur.

Note: this table has coloring scheme to indicate which fields can be seen with different configuration.

Month day

---

Field	Value	Description
Condition type	Month day	A type of condition.
Month override	off | on; default: off	If the option is selected and the specified day is not in the month then the condition uses the last day of the month.
Interval	off | on; default: off	Switches between a specific value and a time interval.
Off: Day of the month	integer [1..31]; default: none	Specifies day of the month at which the action can occur.
On: Start day of the month	integer [1..31]; default: none	Specifies starting day of the interval of the month at which the action can occur.
On: End day of the month	integer [1..31]; default: none	Specifies ending day of the interval of the month at which the action can occur.

Note: this table has coloring scheme to indicate which fields can be seen with different configuration.

Year

---

Field	Value	Description
Condition type	Year	A type of condition.
Inverted function	off | on; default: off	Inverts the selected condition type. Makes the condition true if the time/date is outside the specified interval.
Interval	off | on; default: off	Switches between a specific value and a time interval.
Off: Day of the year	integer [1..366]; default: none	Specifies day of the year at which the action can occur.
On: Start day of the year	integer [1..366]; default: none	Specifies starting day of the interval of the year at which the action can occur.
On: End day of the year	integer [1..366]; default: none	Specifies ending day of the interval of the year at which the action can occur.

Note: this table has coloring scheme to indicate which fields can be seen with different configuration.

[[Category:{{{name}}} Services section]]