Template:Networking rut36x manual input output status: Difference between revisions

Revision as of 14:56, 4 November 2020

ioman.gpio.dio0
ioman.gpio.dio1

Call command ubus call value status:

root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.dio0 status
{
        "value": "0",
        "direction": "in",
        "bi_dir": false,
        "invert_input": false
}

din1 is the input:
- "value": "0" means low level state.
- "value": "1" means high level state.
dout1 is the output:
- "value": "0" means low level state.
- "value": "1" means high level state.

@@ Line 4: / Line 4: @@
 </pre>
-Call command <b>ubus call <u>value</u> status </b>:
+Call command <b>ubus call <i>value</i> status</b>:
   root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.dio0 status