RUT955 SNMP (legacy WebUI): Difference between revisions

Latest revision as of 13:03, 19 July 2021

Main Page > EOL Products > RUT955 > RUT955 Manual > RUT955 Legacy WebUI > RUT955 Services section (legacy) > RUT955 SNMP (legacy WebUI)

The information in this page is updated in accordance with firmware version RUT9XX_R_00.06.09.5.

Note: this user manual page is for RUT955's old WebUI style available in earlier FW versions. Click here for information based on the latest FW version.

Summary

Simple Network Management Protocol (SNMP) is a popular protocol for network management. It is used for collecting information from, and configuring, network devices.

This manual page provides an overview of the SNMP function in RUT955 devices.

SNMP is additional software that can be installed from the System → Package Manager page.

MIB file downloads

FIELD ROUTER	MIB FILE
RUT2XX	TLT-MIB_RUT2XX
RUT9XX	TLT-MIB_RUT9XX

SNMP Configuration

Field	Value	Description
MIB file	- (interactive button)	Downloads the MIB file for this device.
Enable SNMP service	yes \| no; default: no	Turns SNMP on or off.
Enable remote access	yes \| no; default: no	Opens a port (set in the field below) in the Firewall settings so that the SNMP service may be reached remotely from WAN.
Port	integer [0..65535]; default: 161	SNMP service port.
Community	Public \| Private \| Custom; default: Public	SNMP Community is an ID that allows access to a router's SNMP data.
Location	string; default: Location	SysLocation object. Arbitrary SNMP variable that represents a custom location.
Contact	string; default: [email protected]	SysContact object. Arbitrary SNMP variable that represents a contact Name.
Name	string; default: Name	SysName object. Arbitrary SNMP variable that represents the system's Name.
SNMP version	v1/v2 \| v1/v2/v3 \| v3; default: v1/v2	Specifies which SNMP version is to be used.

Trap Settings

Field	Value	Description
SNMP trap	yes \| no; default: no	Turns SNMP trap on or off.
Host/IP	host \| ip; default: none	Host to transfer SNMP traffic to.
Port	integer [0..65535]; default: 162	Port number of the trap's host.
Community	Public \| Private; default: Public	SNMP Community is an ID that allows access to a router's SNMP data.

List of traps

NAME	DESCRIPTION
Signal strength trap	A message will be sent when the mobile signal strength drops below specified value.
Connection type trap	A message will be sent when connection type changes, e.g. GSM changes to WCDMA.
Digital input trap	A message will be sent when digital input state will change to a specified one.
Digital output trap	A message will be sent when digital output state will change to a specified one.
Digital isolated input trap	A message will be sent when digital isolated input state will change to a specified one.
Analog input trap	A message will be sent when input voltage changes, e.g. voltage is Higher than 6V.
Digital relay output trap	A message will be sent when digital relay output state will change to a specified one.

SNMP Variables list

NAME	OID	DESCRIPTION
Device
ModemImei.0	.1.3.6.1.4.1.48690.1.1.0	Modem IMEI
ModemModel.0	.1.3.6.1.4.1.48690.1.2.0	Modem model
ModemManufacturer.0	.1.3.6.1.4.1.48690.1.3.0	Modem manufacturer
ModemRevision.0	.1.3.6.1.4.1.48690.1.4.0	Modem revision
ModemSerial.0	.1.3.6.1.4.1.48690.1.5.0	Modem serial number
Imsi.0	.1.3.6.1.4.1.48690.1.6.0	Modem IMSI
RouterName.0	.1.3.6.1.4.1.48690.1.7.0	Router's name
ProductCode.0	.1.3.6.1.4.1.48690.1.8.0	Router's Product code
BatchNumber.0	.1.3.6.1.4.1.48690.1.9.0	Router's batch number
HardwareRevision.0	.1.3.6.1.4.1.48690.1.10.0	Router's Hardware Revision number
Mobile
SimState.0	.1.3.6.1.4.1.48690.2.1.0	SIM card status
PinState.0	.1.3.6.1.4.1.48690.2.2.0	PIN status
NetState.0	.1.3.6.1.4.1.48690.2.3.0	Mobile network registration status
Signal.0	.1.3.6.1.4.1.48690.2.4.0	Signal strength level
Operator.0	.1.3.6.1.4.1.48690.2.5.0	Operator currently in use
OperatorNumber.0	.1.3.6.1.4.1.48690.2.6.0	Operator number (MCC+MNC)
ConnectionState.0	.1.3.6.1.4.1.48690.2.7.0	Data session connection state
ConnectionType.0	.1.3.6.1.4.1.48690.2.8.0	Data session connection type
Temperature.0	.1.3.6.1.4.1.48690.2.9.0	Modem's temperature in 0.1 degrees Celsius
ReceivedToday.0*	.1.3.6.1.4.1.48690.2.10.0	The current day's RX packet count
SentToday.0*	.1.3.6.1.4.1.48690.2.11.0	The current day's TX packet count
ReceivedYesterday.0*	.1.3.6.1.4.1.48690.2.12.0	Yesterday's RX packet count
SentYesterday.0*	.1.3.6.1.4.1.48690.2.13.0	Yesterday's TX packet count
FirmwareVersion.0	.1.3.6.1.4.1.48690.2.14.0	Router's Firmware version
SimSlot.0	.1.3.6.1.4.1.48690.2.15.0	SIM slot currently in use
RouterUptime.0	.1.3.6.1.4.1.48690.2.16.0	Router up-time in seconds
ConnectionUptime.0	.1.3.6.1.4.1.48690.2.17.0	Mobile connection up-time in seconds
MobileIP.0	.1.3.6.1.4.1.48690.2.18.0	IP address of the mobile interface
Sent.0*	.1.3.6.1.4.1.48690.2.19.0	The amount of data sent through the mobile interface
Received.0*	.1.3.6.1.4.1.48690.2.20.0	The amount of data received through the mobile interface
CellID.0	.1.3.6.1.4.1.48690.2.21.0	ID of the current mobile operator's cell
SINR.0	.1.3.6.1.4.1.48690.2.22.0	SINR value in dB
RSRP.0	.1.3.6.1.4.1.48690.2.23.0	RSRP value in dBm
RSRQ.0	.1.3.6.1.4.1.48690.2.24.0	RSRQ value in dB
iccid.0	.1.3.6.1.4.1.48690.2.25.0	ICCID value for current SIM
Hotspot**
hotSpotId.0	.1.3.6.1.4.1.48690.3.1.1.0	Hotspot ID
hotSpotSsid.0	.1.3.6.1.4.1.48690.3.1.2.0	Hotspot SSID
hotSpotEnableState.0	.1.3.6.1.4.1.48690.3.1.3.0	Hotspot status (enabled or disabled)
hotSpotIP.0	.1.3.6.1.4.1.48690.3.1.4.0	Hotspot interface IP address
hotSpotDownloadBandWidth.0	.1.3.6.1.4.1.48690.3.1.5.0	Hotspot download bandwidth
hotSpotUploadBandWidth.0	.1.3.6.1.4.1.48690.3.1.6.0	Hotspot upload bandwidth
hotSpotUsers.0	.1.3.6.1.4.1.48690.3.1.7.0	Hotspot users list
hotSpotUsersPass.0	.1.3.6.1.4.1.48690.3.1.8.0	Hotspot users password list
hotSpotUsersActive.0	.1.3.6.1.4.1.48690.3.1.9.0	List of active Hotspot users
hotSpotUsersMac.0	.1.3.6.1.4.1.48690.3.1.10.0	Hotspot users MAC address list
hotSpotUsersIp.0	.1.3.6.1.4.1.48690.3.1.11.0	Hotspot users IP address list
hotSpotUsersStartTime.0	.1.3.6.1.4.1.48690.3.1.12.0	Hotspot users log in time list
hotSpotUsersUseTime.0	.1.3.6.1.4.1.48690.3.1.13.0	Hotspot users log in up-time list
hotSpotUsersDownload.0	.1.3.6.1.4.1.48690.3.1.14.0	Hotspot users downloaded data count
hotSpotUsersUpload.0	.1.3.6.1.4.1.48690.3.1.15.0	Hotspot users uploaded data count
hotSpotEndTime.0	.1.3.6.1.4.1.48690.3.1.16.0	Hotspot
Input/Output
DigitalInput.0	.1.3.6.1.4.1.48690.5.1.0	Digital input state
DigitalIsolatedInput.0	.1.3.6.1.4.1.48690.5.2.0	Digital isolated input state
AnalogInput.0	.1.3.6.1.4.1.48690.5.3.0	Analog input state
DigitalOCOutput.0	.1.3.6.1.4.1.48690.5.4.0	Digital OC output state
DigitalRelayOutput.0	.1.3.6.1.4.1.48690.5.5.0	Digital Relay output state
AnalogInputCalc.0	.1.3.6.1.4.1.48690.5.6.0	Analog input value
digital4pinInput.0	.1.3.6.1.4.1.48690.5.7.0	Digital input state from 4PIN
digital4pinOutput.0	.1.3.6.1.4.1.48690.5.8.0	Digital output state from 4PIN
GPS
Longtitude.0	.1.3.6.1.4.1.48690.6.1.0	GPS Longitude value
Latitude.0	.1.3.6.1.4.1.48690.6.2.0	GPS Latitude value
Accuracy.0	.1.3.6.1.4.1.48690.6.3.0	GPS coordinate accuracy
Datetime.0	.1.3.6.1.4.1.48690.6.4.0	GPS coordinate fix time
NumSatellites.0	.1.3.6.1.4.1.48690.6.5.0	Number of GPS satelites

* Mobile data usage values can only be obtained with SNMP v2 or v3.
** Values from second, third or fourth hotspot instance can be taken by changing X value .1.3.6.1.4.1.48690.3.X.1.0, possible values are 1 - 4.

Revision as of 15:02, 3 June 2021 (view source) Dziugas (talk \| contribs) (Created page with "{{Template: Networking_rut_manual_snmp_legacy <!------------------------DEVICE-----------------------> \| name = RUT955 \| series = RUT9XX }}")	Latest revision as of 13:03, 19 July 2021 (view source) Dziugas (talk \| contribs) m (Dziugas moved page Draft:RUT955 SNMP (legacy WebUI) to RUT955 SNMP (legacy WebUI) without leaving a redirect)
(No difference)