RUT240 CLI (legacy WebUI): Difference between revisions
Gytispieze (talk | contribs) m (Gytispieze moved page Draft:RUT240 CLI ((legacy WebUI)) to Draft:RUT240 CLI (((legacy WebUI))) without leaving a redirect: Text replacement - "RUT240(.*)((legacy WebUI))" to "RUT240$1(legacy WebUI)") |
Gytispieze (talk | contribs) m (Gytispieze moved page Draft:RUT240 CLI (((legacy WebUI))) to Draft:RUT240 CLI ((( (legacy WebUI)))) without leaving a redirect: Text replacement - "RUT240(.*)legacy WebUI" to "RUT240 $1 (legacy WebUI)") |
(No difference)
|
Revision as of 09:28, 12 August 2021
Main Page > EOL Products > RUT240 > RUT240 Manual > RUT240 Legacy WebUI > RUT240 Services section (legacy) > RUT240 CLI (legacy WebUI)The information in this page is updated in accordance with firmware version RUT2XX_R_00.01.14.7.
Note: this user manual page is for RUT240's old WebUI style available in earlier FW versions. Click here for information based on the latest FW version.
Summary
The CLI or Command Line Interface functionality allows you to enter and execute Linux commands within the router.
This chapter of the user manual provides an overview of the CLI page for RUT240 devices. You can use "CTRL + ALT + Q" keyboard combination to open a CLI in a new tab while on any router's page.
CLI
CLI is a console interface similar to the Linux Terminal program. Use the following credentials to log in:
- Username: root
- Password: router's password
If the login was successful, you should be greeted with a window like this: