Auto APN: Difference between revisions
Gytispieze (talk | contribs) No edit summary |
Gytispieze (talk | contribs) No edit summary |
||
| Line 11: | Line 11: | ||
  1. Log into your device's WebUI.<br> |   1. Log into your device's WebUI.<br> | ||
  2. Navigate to <b>Network → Interfaces |   2. Navigate to <b>Network → WAN</b> (Basic WebUI mode) or <b>Network → Interfaces</b> (Advanced WebUI mode).<br> | ||
  3. Press <b>Edit</b> on the mobile interface.<br> |   3. Press <b>Edit</b> on the mobile interface.<br> | ||
[[File:Networking_faq_autoapn_configuration_rutos_1.png|border|class=tlt-border]] | [[File:Networking_faq_autoapn_configuration_rutos_1.png|border|class=tlt-border]] | ||
Revision as of 13:38, 28 October 2021
Main Page > FAQ > Control & Configuration > Auto APNHow does Auto APN work
Teltonika devices have an Auto APN feature that allows the device to analyze the SIM card. And automatically select the correct APN information from a pre-loaded database. This function reduces the time required to configure the device in different locations with different providers.
How to configure Auto APN
RUTOS WebUI
Instructions:
1. Log into your device's WebUI.
2. Navigate to Network → WAN (Basic WebUI mode) or Network → Interfaces (Advanced WebUI mode).
3. Press Edit on the mobile interface.
4. Untoggle / Toggle Auto APN.
Legacy WebUI
Auto APN is enabled by default. But if you have just inserted the SIM card you might need to restart (RUT9XX/RUT2XX) routers modem first (Status/Mobile/Mobile Information).
Instructions:
- Log into your device's WebUI.
- Navigate to Network → Mobile.
- Uncheck / Check Auto next to APN.
