TCR100 Remote Monitoring & Administration

TCR100 supports multiple monitoring and administration possibilities.

Remote control options

The TCR100 router supports the following remote control capabilities:

Remote control method	Can get parameters	Can set parameters
RMS
SSH
HTTP
SMS
VPN
MQTT

RMS

---

The Remote Management System (RMS) is designed to conveniently monitor and manage all your Teltonika networking devices. The system allows to securely gather status information of your devices and to change their configuration even if the devices do not have public IP addresses.

RMS access can be configured from the System → Administration → RMS page.

Public IP

---

If you're using a SIM card that has a Public IP address (refer here for more information), you can reach the router via HTTP or SSH via its WAN IP address.

HTTP access

---

Remote HTTP access can be set up via the System → Administration → Access Control page.

SSH access

---

Remote SSH access can be set up via the System → Administration → Access Control page.

SMS

---

The router can be controlled via SMS messages using SMS utilities rules. SMS can be configured via the Services → SMS Utilities → SMS Rules page.

VPN

---

Virtual Private Networks (VPNs) provide multiple flexible options on setting up remote access to the router and its LAN network. For more information on different types of VPNs supported by TCR100, visit the VPN manual page.

MQTT

---

MQTT (MQ Telemetry Transport or Message Queue Telemetry Transport) is a publish-subscribe-based "lightweight" messaging protocol for use on top of the TCP/IP protocol. For more information on MQTT in TCR100, visit the MQTT manual page