Template:Networking rutos manual leds: Difference between revisions

From Teltonika Networks Wiki
No edit summary
No edit summary
Line 227: Line 227:
         <td>4G LED turned on</td>
         <td>4G LED turned on</td>
         <td>Device is connected to a 4G network.</td>
         <td>Device is connected to a 4G network.</td>
     </tr>{{#ifeq: {{{2g}}} | 1 |
     </tr>{{#ifeq: {{{5g}}} | 1 |
    <tr>
        <td>5G LED turned on</td>
        <td>Device is connected to a 5G network.</td>
    </tr>|}}{{#ifeq: {{{2g}}} | 1 |
     <tr>
     <tr>
         <td>2G blinking</td>
         <td>2G blinking</td>
Line 239: Line 243:
         <td>4G blinking</td>
         <td>4G blinking</td>
         <td>Device is connected to a 4G network but hasn't received an IP address.</td>
         <td>Device is connected to a 4G network but hasn't received an IP address.</td>
     </tr>
     </tr>{{#ifeq: {{{5g}}} | 1 |
    <tr>
        <td>5G blinking</td>
        <td>Device is connected to a 5G network but hasn't received an IP address.</td>
    </tr>|}}
     <tr>
     <tr>
         <td>{{#ifeq:{{{2g}}}|1|2G,|}} 3G & 4G LEDs blinking at the same time every 500 ms</td>
         <td>All LEDs blinking at the same time every 500 ms</td>
         <td>No SIM card or incorrect PIN.</td>
         <td>No SIM card or incorrect PIN.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>{{#ifeq:{{{2g}}}|1|2G,|}} 3G & 4G LEDs turns on and off in a sequence one after the other</td>
         <td>All LEDs turn on and off in a sequence one after the other</td>
         <td>The device is attempting to connect to a mobile network operator.</td>
         <td>The device is attempting to connect to a mobile network operator.</td>
     </tr>
     </tr>

Revision as of 07:47, 1 September 2022

This page contains information the different types of LEDs and their behaviour on a {{{name}}} device.

Power LED

The power LED is located on the bottom left corner of the front panel, just under the power connector.

[[File:Networking_{{{name}}}_manual_leds_power_led.png]]

It indicates whether the device is powered on or not.

State Description
M LED turned on Device is powered over the Main power connector.
M LED turned off Device is not powered over the Main power connector..
R LED turned on Device is powered over the Reserve power connector.
R LED turned off Device is not powered over the Reserve power connector.

[[Category:{{{name}}} Manual]]