Template:Networking rut2xx firmware change log

RUT2_R_00.07.02.6 | 2022.08.24

• Improvements:
  • Added 'home.vodafone.de' APN
  • Improved stability of device information storage

• Fixes:
  • Added SMSC type omitting when empty SMSC number parsed in SMS PDU mode
  • Fixed Serial-symlink dmesg messages
  • Fixed OpenVPN tls-auth and tls-crypt option names

RUT2_R_00.07.02.5 | 2022.08.12

• Improvements:
  • Updated curl to version 7.83.1
  • Updated firmware validation error messages
  • Added multiple source IP address support to the Port Forwards page
  • Increased custom APN Username & Password field maximum length to 64 symbols
  • Added auto switch to modem's SMS storage when SIM card storage doesn't exist
  • Improved mobile connection status handling
  • Added CSP headers Hotspot WebUI landing page

• Fixes:
  • Fixed CVE-2022-32205, CVE-2022-32206, CVE-2022-32207, CVE-2022-32208 curl vulnerabilities
  • Fixed CVE-2022-30065 busybox vulnerability
  • Fixed file upload path traversal
  • Removed Data to Server limit to proccess less than 10 instances
  • Fixed Data to Server 'out of memory' crashes when database is full or has a large amount of data
  • Fixed OpenVPN dev setting logic
  • Fixed OpenVPN updating from legacy issue that caused IPv6 not to work
  • Fixed MAC and leasetime setting for Bridge & Passthrough modes
  • Fixed modal tabs navigation when editing wireless interface with non-english languages

RUT2_R_00.07.02.4 | 2022.07.20

• Improvements:
  • Added default password change warning message before firmware downgrade
  • Extended time period for device to make connection to operator
  • Reduced the number of modem reboots when changing mobile settings
  • Reduced excessive log output when no SIM card is inserted
  • Added modem restart prevention on modem init
  • Added disable RPLMN option in the SIM section of the SIM card config

• Fixes:
  • Fixed CVE-2022-2068 vulnerability
  • Disabled autoconnect on stop-network call
  • Fixed Hotspot login via landing page issue

RUT2_R_00.07.02.2 | 2022.06.27

• Improvements:
  • Added ping to DNS IPv6 support
  • Added modem reset to default state after device FW upgrade
  • Modem init now checks NVRAM sensitive commands before setting
  • GSM output was made consistent
  • Updated FSTools package to version 2022-05-03
  • Added security headers to web requests

• Fixes:
  • Fixed CVE-2019-12900 libbz2 vulnerability
  • Fixed behavior of some gsmctl commands
  • Fixed CVE-2022-23303 hostapd vulnerability
  • Fixed CVE-2022-29581 Linux kernel vulnerability
  • Fixed CVE-2022-29458 ncurses vulnerability
  • Fixed CVE-2022-1292 c_rehash script command injection vulnerability
  • Fixed band locking issue
  • Fixed race condition for wireless configuration initialization
  • Fixed operator control issue

RUT2_R_00.07.02.1 | 2022.06.06

• Improvements:
  • Improved GSM related messages in Troubleshoot logs

• Fixes:
  • Fixed IGMP Proxy menu item not appearing after package installation
  • Fixed default mobile network configuration generation
  • Fixed MODBUS write requests and Mobile Utils option setting

RUT2_R_00.07.02 | 2022.05.23

• New features
  • Overview side widget
  • IGMP Proxy
  • Privileged Access Management (PAM)
  • AWS Greengrass support
  • HTTPS certificate and key upload feature
  • SSH public keys edit box
  • License page
  • DNP3 data for Data to Server

• Improvements
  • Updated busybox to version: 1.34.1
  • Updated curl to version 7.79.1
  • Added iptables filter package for string filtering
  • Added CHAP authentication for L2TP VPN
  • Added IPv6 support for L2TPv3 VPN
  • Added EAP-MSCHAPV2 authentication method for IPsec VPN
  • Added IPv6 support to Auto Reboot
  • Added 'Save to flash' and 'Test configuration' button to DNP3 configuration page
  • Updated SNMP version 5.9.1
  • Added OpenSSL authentication options to SNMPv3
  • Added support for OSPF redistribution options and OSPF neighbors
  • Added password field to BGP Peers page
  • Extended BGP "AS" field validation to accept integers up to 4294967295
  • Added "DHE+RSA" to OpenVPN cipher selections
  • Increased OpenVPN max password length from 128 bytes to 512 bytes
  • Made HMAC key direction initial value dependent on the role of the instance (client or server)
  • Made HMAC key and HMAC authentication key upload fields required
  • Added DES to IPsec encryption algorithms selections
  • Added special character support for CHAP secrets
  • Added validation requirements for PPTP user list username field
  • Added option to manually enter Public key in Wireguard configuration
  • Made generating Wireguard keys possible only while in auto mode
  • Added Events Log database to troubleshoot archive
  • Added RFC1918 filter field
  • Added the possibility to unblock multiple blocked devices at once
  • Added 'Port' column to blocked login attempts table
  • Added Speedtest server refresh
  • Updated Speedtest server list
  • Added asterisk option to Site Blocking
  • Added MD5 and SHA256 checksums to package validation page
  • Changed certificate requirements to only require client key file if client certificate is used
  • Added pagination and data retention between table pages
  • Added pagination functionality to tables when there are more than 10 records
  • Improved table sorting by saving user provided sort settings in the browser
  • Improved drag and drop functionality
  • Added the possibility to drag and drop files onto upload components
  • Moved 'Root CA' from the 'Access Control' page to the 'Certificates' page
  • Added 'Strict-Transport-Security' response header for HTTPS
  • Added 'breadcrumbs' to modal windows
  • Improved initial WebUI loading after login
  • Added mobile bytes sent and bytes received SNMP OIDs
  • Added mobile LED turn off feature ('System -> Administration' page)
  • Added 'iot.1nce.net', 'internet', 'VZWINTERNET' and Truphone APNs to APN database
  • Updated mobile usage data point calculation logic
  • Added the possibility to manually enter operator number
  • Improved obtain mobile cell ID process
  • Added modem restart if SIM card is removed during APN database fetching process
  • Added unauthorized call logging
  • Added space character support in SMS commands
  • Disabled SMS modem storage configuration form when SIM is not inserted
  • Changed SMS '%wi' parameter value to return IP address of any currently used WAN interface (not only wired)
  • Added external modem SMS limit Overview card and widget
  • Made in-use APNs visible next to mobile interface configurations (before clicking the 'Edit' button)
  • Added duplicate value check for list configuration options
  • Changed mobile card instance design
  • Fixed 'Mobile Data usage reset' SMS rule
  • Fixed the default state parameter of SMS list POST/GET command
  • Added Hotspot configuration profiles
  • Added local Hotspot user password hashing
  • Added Hotspot password encoding option
  • Improved Hotspot related firewall rule setting
  • Improved WiFi Scanner enable switch to toggle 2 and 5 GHz instances separately
  • Removed CHAP authentication protocol for WiFi Hotspots due to incompatibility with hashed passwords
  • Added ubus support to Hotspot
  • Changed default port name of WiFi devices for 'Topology state' Events Reporting rule
  • Added I/O SNMP trap
  • Added ISO 8601 time format to I/O Juggler's '%ts' parameter
  • Added device name parameter '%pc' to I/O Juggler
  • Added PPPoE VLAN priority support
  • Made VRRP ping section dependent on main instance
  • Added 'WAN to LAN' switch

• Fixes
  • Fixed CVE-2021-20322, CVE-2021-4197, CVE-2022-1011, CVE-2022-0847 kernel vulnerabilities
  • Fixed CVE-2022-28391 busybox vulnerability
  • Fixed CVE-2018-16789 shellinabox vulnerability
  • Fixed CVE-2021-44543, CVE-2021-44542 privoxy vulnerabilities
  • Fixed CVE-2021-43618 GNU Multiple Precision Arithmetic Library vulnerability
  • Fixed zlib backport security issue
  • Fixed Wireguard firewall zone assignment
  • Fixed queued packages disappearing from list after FW upgrade with keep settings
  • Fixed error message display for multiple input validation rules
  • Fixed incorrect DHCP validation range for start and limit fields
  • Removed 'Bring up on boot' option from network interface configuration pages
  • Fixed coma-separated DHCP options disappearing after save
  • Fixed exclude and listen interfaces
  • Fixed 'Use broadcast flag' option saving
  • Fixed firewall zone assignment when creating new interfaces
  • Fixed OpenVPN 'Netmask' and 'IP address' field validations
  • Fixed OpenVPN TAP configuration saving issue
  • Fixed OpenVPN switching to TUN mode when uploading a configuration from file
  • Fixed dynamic BGP route state display
  • Fixed BGP peer enable in edit page
  • Fixed issue when no L2TP client instance could be bound to IPsec
  • Fixed firewall rule and zone behavior related to config section creation
  • Added default value for L2TPv3 netmask, which is now written to config after save
  • Fixed passthrough option saving to IPsec file
  • Fixed DMVPN issue where instance configuration could not be saved
  • Fixed Wireguard peer could not be saved issue
  • Fixed NTP client time synchronization after factory reset
  • Fixed device time display with selected time zone
  • Fixed MODBUS TCP indexation missing bracket issue
  • Fixed initial MODBUS TCP request count validation
  • Fixed PIN 3/4 direction switching over MODBUS TCP
  • Fixed MODBUS data to MQTT socket closing issue when connection fails
  • Fixed MODBUS alarm configuration deletion
  • Fixed DNP3 master not working after FW upgrade with 'keep settings'
  • Fixed DNP outstation not returning error messages
  • Added missing SNMP objects: mobile IP, data sent/received today
  • Fixed MQTT Publisher 'Remote address' field validation
  • Fixed long interface name support for Azure IoT Hub
  • Increased maximum Azure IoT Hub 'Connection String' length to 4096 characters
  • Fixed missing sent/received data issue
  • Fixed URL input field length validation
  • Fixed admin login issue after upload of backup from a device with older firmware versions
  • Fixed MAC address formatting in Events reporting messages
  • Fixed Events reporting DHCP lease message spam, when no new lease is added
  • Fixed logging crashing after downloading Troubleshoot file
  • Made Wake on LAN visible only on devices with Ethernet ports
  • Fixed Traffic log file transfer to FTP server
  • Fixed Web Filter service reloading after a host list file is uploaded
  • Fixed access denied messages when sending JSON-RPC requests from root user
  • Fixed error message display about duplicated intervals in Profile scheduler
  • Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields
  • Corrected OSPF Routing card values, value positions and names
  • Fixed global secret instances not being removed when there are no IPsec instances
  • Fixed uploaded file remove icon not staying in position on hover
  • Fixed Overview card collapse issue that made it unresponsive after too many clicks
  • Removed WAN6 interface from the Overview page
  • Fixed mobile IPv6 display in Events Reporting status messages
  • Fixed Bridge mode when DNS2 is not available
  • Fixed PAP/CHAP username and password fields not saving in interface edit window
  • Fixed sending email without secure connection for providers that support such an option
  • Fixed 'N/A' parameter showing up in SMS Utilities monitoring status message
  • Fixed Call Utilities Events Log message for reboot rule
  • Fixed SMS command validation for no-authorization option
  • Fixed MODBUS SMS alarms 'Enable' option saving
  • Fixed running RMS with no SIM card inserted issue
  • Fixed firmware available on server version checking issue
  • Fixed CVE-2020-15078 openvpn vulnerability
  • Fixed storage calculation for packages
  • SMS Utilities: enhanced service security
  • Fixed firmware deletion after leaving the page
  • Fixed setup wizard redirect after LAN IP change
  • Fixed various validation bugs, typos, option hints & alignments
  • Fixed multiple IPv6 configuration field validations
  • Fixed PDP logging for Verizon operator
  • Added multiwan support for Wireguard default route
  • Fixed wireless signal strength display when no clients are connected
  • Fixed loss of connectivity for clients when router is in STA+AP mode
  • Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP
  • Fixed Wifi Scanner data not being stored in certain scenarios
  • Fixed WiFi scanner not turning on after FW upgrade with 'keep settings'
  • Fixed Hotspot user group limit not resetting on specified time
  • Removed an RMS error message when no Hotspot users were created
  • Fixed Hotspot landing page image upload issue
  • Fixed relay output value display in I/O Juggler condition page
  • Fixed I/O Juggler's WiFi rule not enabling or disabling WiFi interfaces
  • Fixed I/O Juggler's double delete issue on I/O Juggler action and condition instances
  • Fixed I/O Juggler's incorrect I/O status messages
  • Fixed APN migration if APN was selected from APN list on legacy firmware
  • Fixed RIP configuration migration from legacy firmware versions
  • Fixed Wireguard interface status setting migration from legacy firmware versions
  • Fixed default config options for SSH and Web access SMS Utilities rules

RUT2_R_00.07.01.4 | 2022.02.25

• Improvements
  • Increased Port Forwards rule max name length
  • Added a new '%it' parameter for UTC time in ISO 8601 format to I/O Juggler

• Fixes
  • Added missing bracket to the end of MODBUS messages
  • Fixed preserving the contents of /etc/luci-uploads/ after FW upgrade with the 'Keep all settings' option
  • Fixed IPv4-Gateway column showing empty values in the Status -> Routes page
  • Fixed firewall extra option validation
  • Fixed Hotspot enable button validation
  • Removed invalid network interface selections from the "Network" dropdown in the Wireless interface configuration page
  • Changed the logic of uploading files to the modem
  • Fixed second mobile interface creation issue
  • Fixed usage of custom headers in I/O Juggler HTTP action
  • Fixed 'verify' option parsing for I/O Juggler
  • Fixed OpenVPN server configuration with password authentication
  • Fixed NTP interval length validation
  • Fixed network interface enable after Drag & Drop
  • Updated NTP client interval to 24h
  • Fixed connection to whitelist carriers
  • Fixed Passthrough mode when DHCP is disabled
  • Fixed 'Deny data roaming' feature
  • Fixed mobile blocking dependency on region
  • Disabled Ping To DNS functionality when Bridge/Passthrough mode is enabled

RUT2_R_00.07.01.2 | 2022.01.04

• New features
  • DFOTA modem upgrade system for Quectel modems

• Improvements
  • Removed L2TP section title prefixes

• Fixes
  • Fixed IPSec crashing issue using mobile
  • Fixed FW flashing when chip is in unknown state
  • Fixed CPU usage percentage display in the Overview page
  • Fixed FOTA timeout issue when server does not respond
  • Fixed installation of backup packages
  • Fixed mobile data limit display after profile change
  • Fixed Bridge mode without multi-APN
  • Fixed multi mobile interface checking
  • Fixed error handling when the modem is not responding
  • Prolonged autoconnect setting timeout

RUT2_R_00.07.01 | 2021.11.18

Note: Firmware version RUT2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.

---

• New features
  • RUTOS WebUI