Changes

13 bytes removed ,  16:47, 10 November 2022
no edit summary
Line 54: Line 54:  
The Actions section is used to manage and create new Actions that can be executed by the I/O Juggler Rules. The figure below is an example of the Actions section, which is empty by default. You can learn more about it [[RUT955_Input/Output#Actions|here]].
 
The Actions section is used to manage and create new Actions that can be executed by the I/O Juggler Rules. The figure below is an example of the Actions section, which is empty by default. You can learn more about it [[RUT955_Input/Output#Actions|here]].
 
----
 
----
* Log into Router 1 WebUI and go to the '''Services → Input/Output → I/O Juggler → Actions''' page;
+
* Log into Router 1 WebUI and go to the '''Services → Input/Output → I/O Juggler → Actions (1)''' page;
* '''Enter''' the desired action '''instance name''' and select '''desired action type''';  
+
* '''Enter''' the desired action '''instance name (2)''' and select '''desired action type (3)''';  
* Click '''add''';  
+
* Click '''add (4)''';  
 
[[File:IO juggler action sms.png|border|center|class=tlt-border|1004x1004px]]
 
[[File:IO juggler action sms.png|border|center|class=tlt-border|1004x1004px]]
   Line 88: Line 88:     
==Via Public IP==
 
==Via Public IP==
For this configuration you will need a Static or Dynamic Public IP address. You can read up more on this in our article on [[Private_and_Public_IP_Addresses|Private and Public IP Addresses.]] Action will execute a script that contains a curl -X command which will RUT2 Output state to a high via RUT2 Public IP.  
+
For this configuration you will need a Static or Dynamic Public IP address. You can read up more on this in our article on [[Private_and_Public_IP_Addresses|Private and Public IP Addresses.]] Action will execute a script that contains a curl -X command which will change RUT2 Output state to a high via RUT2 Public IP.  
    
===RUT 1===
 
===RUT 1===
Line 94: Line 94:  
====Remote access====
 
====Remote access====
 
----
 
----
Navigate to '''System → Administration → Access Control''':
+
* Navigate to '''System → Administration → Access Control'''
 +
* Open '''General''' tab ('''1''') and locate the '''WebUI section''';
 +
* '''Enable''' remote '''HTTP''' ('''2''') and '''HTTPS''' access ('''3''');
 +
* '''Save''' and '''apply''' '''changes''' ('''4''');
    
[[File:Access control rutos.png|border|center|class=tlt-border|1004x1004px]]
 
[[File:Access control rutos.png|border|center|class=tlt-border|1004x1004px]]
   −
# Open '''General''' tab ('''1''') and locate the '''WebUI section''';
  −
# '''Enable''' remote '''HTTP''' ('''2''') and '''HTTPS''' access ('''3''');
  −
# Save and apply changes ('''4''');
  −
  −
'''Note:''' Not marked fields can be left as default.
   
====SMS Gateway configuration====
 
====SMS Gateway configuration====
 
----
 
----