Domnev1

Introduction

This article contains instructions on how to configure SMS and Script alerts using I/O Juggler and SMS Utilities between two RUT955 routers.

Relayd installation

---

Install relayd package if needed, skip this step on RUTX series devices or if you already installed it on your router

opkg update 
opkg install relayd

WiFi client configuration

---

Add WiFi interface to make your router act as a WiFi client (connect to another AP)

uci add wireless wifi-iface
uci set wireless.@wifi-iface[-1]=wifi-iface

Add new WiFi interface to 2.4ghz device, can specify 'radio1' for 5ghz

uci set wireless.@wifi-iface[-1].device='radio0'
uci set wireless.@wifi-iface[-1].mode='sta'
uci set wireless.@wifi-iface[-1].network='wifi_wan'

Change SSID here to an SSID that the router will be connecting to

uci set wireless.@wifi-iface[-1].ssid='RUT_4474_2G'

uci set network.wifi_wan=interface
uci set network.wifi_wan.proto='dhcp'
uci set network.wifi_wan.metric='6'
uci set network.wifi_wan.disabled='0'
uci set network.wifi_wan.force_link='0'
uci set network.wifi_wan.broadcast='0'

Change BSSID here to BSSID that the router will be connecting to (L2 address)

uci set wireless.@wifi-iface[-1].bssid='00:1E:42:44:44:74'

Use appropriate auth method, PSK2 = WPA2-PSK here

uci set wireless.@wifi-iface[-1].encryption='psk2'

Change secret to appropriate one

uci set wireless.@wifi-iface[-1].key='Vc80Tps1'
uci set wireless.@wifi-iface[-1].disabled='0'
uci set wireless.@wifi-iface[-1].skip_inactivity_poll='0'
uci set wireless.@wifi-iface[-1].wifi_id='wifi1'

New internface configuration

uci set network.wifi_wan=interface
uci set network.wifi_wan.proto='dhcp'
uci set network.wifi_wan.metric='6'
uci set network.wifi_wan.disabled='0'
uci set network.wifi_wan.force_link='0'
uci set network.wifi_wan.broadcast='0'