511
edits
Changes
VLAN Inter-Zone accessibility control configuration example (view source)
Revision as of 12:23, 14 December 2022
, 12:23, 14 December 2022no edit summary
In this example we will show how to manage VLAN to VLAN communication with either '''one''' firewall zone or '''multiple''' firewall zones.
In this example we will show how to manage VLAN to VLAN communication with either '''one''' firewall zone or '''multiple''' firewall zones.
If you're having trouble finding any page or some of the parameters described here on your device's WebUI, you should turn on '''"Advanced WebUI"''' mode. You can do that by '''clicking''' the '''"Basic"''' button '''under''' '''"Mode,"''' which is located at the top-right corner of the WebUI.
[[File:Basic WebUI Advanced.gif|border|class=tlt-border|1004x1004px]]
==Setting up VLANs==
==Setting up VLANs==
Created VLANs in the WebUI should look similar to this:
Created VLANs in the WebUI should look similar to this:
[[File:3vlansforintervlan.png|border|class=tlt-border|]]
==VLAN to VLAN communication with one firewall zone==
