511
edits
Changes
Teltonika EYE device pairing and data sender configuration example (view source)
Revision as of 14:00, 25 January 2023
, 14:00, 25 January 2023→TCP server setup
===TCP server setup===
===TCP server setup===
----
----
Since we are using Hercules application as TCP server, the setup is simple: start the application and switch to the TCP server tab. Make sure to listen on the same port(8080 in this example) as set up in data sender configuration (1) and you should see the Bluetooth data incoming (2).
Since we are using Hercules application as TCP Server, the setup is simple: start the application and switch to the TCP Server tab. Make sure to listen on the same port(8080 in this example) as set up in data sender configuration (1) and you should see the Bluetooth data incoming (2).
[[File:Bluetootheyesensorconfiguration herculesdata v1.png|border|600px|class=tlt-border]]
[[File:Bluetootheyesensorconfiguration herculesdata v1.png|border|600px|class=tlt-border]]
