511
edits
Changes
Teltonika EYE device pairing and data sender configuration example (view source)
Revision as of 17:04, 25 January 2023
, 17:04, 25 January 2023→MQTT Subscriber setup and testing
</pre>
</pre>
Here '''-t''' option means topic and '''-h''' identified MQTT broker IP address.
Here '''-t''' option means topic and '''-h''' is used to set MQTT broker IP address.
If everything is set up correctly, you should be able to see incoming MQTT messages:
If everything is set up correctly, you should be able to see incoming MQTT messages:
