The '''Data to Server''' feature provides you with the possibility to set up data senders that collect data from various sources and periodically send it to remote servers. This section will walk you through configuring the Data to Server to send M-Bus data to the Node-RED server. To configure Data to Server, '''access the router's WebUI''' and navigate to '''Services''', then '''Data to Server''':
+
The '''[[TRB143_Data_to_Server|Data to Server]]''' feature provides you with the possibility to set up data senders that collect data from various sources and periodically send it to remote servers. This section will walk you through configuring the Data to Server to send M-Bus data to the Node-RED server. To configure Data to Server, '''access the router's WebUI''' and navigate to '''Services''', then '''Data to Server''':
# '''Enable''' instance;
# '''Enable''' instance;
Line 66:
Line 66:
====M-Bus configuration====
====M-Bus configuration====
----
----
−
The '''M-Bus Settings''' section is used to configure the general service functionality. To set up a new M-Bus instance, go to '''Services → M-Bus:'''
+
The '''[[TRB143_M-Bus|M-Bus Settings]]''' section is used to configure the general service functionality. To set up a new M-Bus instance, go to '''Services → M-Bus:'''