1,108
edits
Changes
no edit summary
<p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.4'''] firmware version .</p>
<p style="color:red">The information on this page is updated in accordance with the [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.4'''] firmware version .</p>
==Introduction==
==Introduction==
==Topology==
==Topology==
RUT1 - RUTX11 as a hub. It will be our "default gateway" for spoke device. RUTX11 has a LAN subnet of 192.168.11.0/24 configured on it, which should be reachable by the spoke.
'''RUT1''' - RUTX12 as a '''hub'''. A hub is a server, to which our spoke will be connecting (IPsec responder). It will be our "default gateway" for the spoke device. RUTX12 has a LAN subnet of 192.168.11.0/24 configured on it, which should be reachable by the '''spoke'''.
RUT2 - RUT955 as a spoke. It will be connecting to a hub for basic internet access. RUT955 has a lan subnet of 192.168.9.0/24 configured on it, which should be reachable by the hub.
'''RUT2''' - RUT955 as a '''spoke'''. A spoke is a client, that will be connected to the spoke (IPsec initiator). It will be connected to a '''hub''' for basic internet access. RUT955 has a LAN subnet of 192.168.9.0/24 configured on it.
==RUT1 (Hub) configuration==
==RUT1 (Hub) configuration==
Start by configuring HUB (RUT1) device. Login to the WebUI, navigate to '''Services → VPN → IPsec''' and add a new IPsec instance. Configure everything as follows.
Start by configuring the hub (RUT1) device. Login to the WebUI, navigate to '''Services → VPN → IPsec''' and '''add a new IPsec instance'''. Configure everything as follows.
'''Note:''' '''''Not specified fields can be left as-is or changed according to your needs.'''''
'''Note:''' '''''Not specified fields can be left as is or changed according to your needs.'''''
===Instance configuration===
===Instance configuration===
----
----
==RUT2 (Spoke) configuration==
==RUT2 (Spoke) configuration==
Login to the RUT2 WebUI, navigate to '''Services → VPN → IPsec''' and add a new IPsec instance. Configure everything as follows.
Login to the RUT2 WebUI, navigate to '''Services → VPN → IPsec''' and '''add a new IPsec instance.''' Configure everything as follows.
===Instance configuration===
===Instance configuration===
----
----
</table>
</table>
===Proposalconfiguration===
===Proposal configuration===
----
----
<table class="nd-othertables_2">
<table class="nd-othertables_2">
</table>
</table>
==Testing configuration==
==Testing the configuration==
After we establish the tunnel, we may observe the following information:
After we establish the tunnel, we may observe the following information:
===RUT1 (Hub) side===
===RUT1 (Hub) side===
