| Line 177: |
Line 177: |
| | If you've followed all the steps presented above, your configuration should be finished. But as with any other configuration, it is always wise to test the setup in order to make sure that it works properly. | | If you've followed all the steps presented above, your configuration should be finished. But as with any other configuration, it is always wise to test the setup in order to make sure that it works properly. |
| | | | |
| − | Using the <code><span class="highlight">ipsec statusall</span></code> command we can see that IPsec tunnel is successfully established on both routers. The command output on a '''hub (RUT1)''' device: | + | Using the <code><span class="highlight">'''ipsec status'''</span></code> command we can see that IPsec tunnel is successfully established on both routers. The command output on a '''hub (RUT1)''' device: |
| | | | |
| − | <pre>
| + | [[File:IPsec statusHUB.png|border|class=tlt-border|839x74px|center]] |
| − | root@Teltonika-RUTX12:~# ipsec statusall
| |
| − | Status of IKE charon daemon (strongSwan 5.9.2, Linux 5.4.231, armv7l):
| |
| − | uptime: 74 minutes, since Mar 21 08:52:39 2023
| |
| − | worker threads: 11 of 16 idle, 5/0/0/0 working, job queue: 0/0/0/0, scheduled: 2
| |
| − | loaded plugins: charon aes des sha2 sha1 md4 md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs8 pgp pem openssl gmp xcbc hmac kernel-netlink socket-default stroke vici updown eap-identity eap-mschapv2 xauth-generic
| |
| − | Virtual IP pools (size/online/offline):
| |
| − | 10.20.30.0/24: 254/1/0
| |
| − | Listening IP addresses:
| |
| − | 84.xxx.xxx.xxx
| |
| − | 192.168.11.1
| |
| − | fd93:51e6:6fe8::1
| |
| − | Connections:
| |
| − | HUB-HUB_c: %any...%any IKEv2
| |
| − | HUB-HUB_c: local: uses pre-shared key authentication
| |
| − | HUB-HUB_c: remote: uses pre-shared key authentication
| |
| − | HUB-HUB_c: child: 0.0.0.0/0 === dynamic TUNNEL
| |
| − | Security Associations (1 up, 0 connecting):
| |
| − | HUB-HUB_c[2]: ESTABLISHED 74 minutes ago, 84.xxx.xxx.xxx[84.xxx.xxx.xxx]...88.xxx.xxx.xxx[192.168.86.197]
| |
| − | HUB-HUB_c[2]: IKEv2 SPIs: ded11f31c20352dc_i 58ebc8d96264c21e_r*, pre-shared key reauthentication in 89 minutes
| |
| − | HUB-HUB_c[2]: IKE proposal: AES_CBC_256/HMAC_SHA2_512_256/PRF_HMAC_SHA2_512/ECP_521
| |
| − | HUB-HUB_c{3}: INSTALLED, TUNNEL, reqid 1, ESP in UDP SPIs: c27cb140_i c7382615_o
| |
| − | HUB-HUB_c{3}: AES_CBC_128/HMAC_SHA2_256_128/ECP_521, 215536 bytes_i (1981 pkts, 1s ago), 126021 bytes_o (499 pkts, 1s ago), rekeying in 14 minutes
| |
| − | HUB-HUB_c{3}: 0.0.0.0/0 === 10.20.30.1/32
| |
| − | </pre>
| |
| | | | |
| | The same command output on '''spoke (RUT2)''' device: | | The same command output on '''spoke (RUT2)''' device: |
| | | | |
| − | <pre>
| + | [[File:IPsec status SPOKE.png|border|class=tlt-border|852x105px|center]] |
| − | root@Teltonika-RUT955:~# ipsec statusall
| |
| − | Status of IKE charon daemon (strongSwan 5.9.2, Linux 5.4.229, mips):
| |
| − | uptime: 23 hours, since Mar 20 12:21:06 2023
| |
| − | worker threads: 11 of 16 idle, 5/0/0/0 working, job queue: 0/0/0/0, scheduled: 9
| |
| − | loaded plugins: charon aes des sha2 sha1 md4 md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs8 pgp pem openssl gmp xcbc hmac kernel-netlink socket-default stroke vici updown eap-identity eap-mschapv2 xauth-generic
| |
| − | Listening IP addresses:
| |
| − | 192.168.86.197
| |
| − | 192.168.9.1
| |
| − | fd35:98cd:61f0::1
| |
| − | Connections:
| |
| − | passth_SPOKE_ph2_1_lan: %any...%any IKEv1/2
| |
| − | passth_SPOKE_ph2_1_lan: local: uses public key authentication
| |
| − | passth_SPOKE_ph2_1_lan: remote: uses public key authentication
| |
| − | passth_SPOKE_ph2_1_lan: child: 192.168.9.0/24 === 192.168.9.0/24 PASS
| |
| − | SPOKE-SPOKE_c: %any...84.xxx.xxx.xxx IKEv2 | |
| − | SPOKE-SPOKE_c: local: uses pre-shared key authentication
| |
| − | SPOKE-SPOKE_c: remote: [84.xxx.xxx.xxx] uses pre-shared key authentication
| |
| − | SPOKE-SPOKE_c: child: dynamic === 0.0.0.0/0 TUNNEL
| |
| − | Shunted Connections:
| |
| − | passth_SPOKE_ph2_1_lan: 192.168.9.0/24 === 192.168.9.0/24 PASS
| |
| − | Security Associations (1 up, 0 connecting):
| |
| − | SPOKE-SPOKE_c[431]: ESTABLISHED 77 minutes ago, 192.168.86.197[192.168.86.197]...84.xxx.xxx.xxx[84.xxx.xxx.xxx]
| |
| − | SPOKE-SPOKE_c[431]: IKEv2 SPIs: ded11f31c20352dc_i* 58ebc8d96264c21e_r, pre-shared key reauthentication in 77 minutes
| |
| − | SPOKE-SPOKE_c[431]: IKE proposal: AES_CBC_256/HMAC_SHA2_512_256/PRF_HMAC_SHA2_512/ECP_521
| |
| − | SPOKE-SPOKE_c{14}: INSTALLED, TUNNEL, reqid 1, ESP in UDP SPIs: c7382615_i c27cb140_o
| |
| − | SPOKE-SPOKE_c{14}: AES_CBC_128/HMAC_SHA2_256_128/ECP_521, 136768 bytes_i (536 pkts, 6s ago), 235975 bytes_o (2169 pkts, 1s ago), rekeying in 13 minutes
| |
| − | SPOKE-SPOKE_c{14}: 10.20.30.1/32 === 0.0.0.0/0
| |
| − | </pre>
| |
| | | | |
| − | Also, as the hub should be reachable by spoke, we can try pinging the hub using <code><span class="highlight">ping 192.168.11.1</span></code>: | + | Also, as the hub should be reachable by spoke, we can try pinging the hub using <code><span class="highlight" >'''ping 192.168.11.1'''</span></code>: |
| | + | |
| | + | [[File:Ping to hub.png|border|class=tlt-border|454x77px|center]] |
| | | | |
| | == See also == | | == See also == |
| − | | + | [[RUTX12_VPN#IPsec|IPsec on Teltonika Networks devices]] |
| | == External links == | | == External links == |
| | + | [https://openwrt.org/docs/guide-user/services/vpn/strongswan/basics OpenWrt IPsec basics] |
