Changes

Domnev (view source)

Revision as of 14:23, 22 March 2023

403 bytes added ,  14:23, 22 March 2023
no edit summary
Line 1: Line 1:  
<p style="color:red">The information on this page is updated in accordance with the [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.4'''] firmware version .</p>
 
<p style="color:red">The information on this page is updated in accordance with the [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.4'''] firmware version .</p>
 
==Introduction==
 
==Introduction==
 +
Normally we configure IPsec for LAN-to-LAN communication which is also known as split-tunnel VPN when only specific hosts should be reachable via VPN tunnel. However, we may also take a different approach and configure VPN tunnel using full-tunnel method. This means that any non-directly connected network (i.e. lan interface) will be reachable only via IPsec tunnel and not via typical default route.
    
==Configuration overview and prerequisites==
 
==Configuration overview and prerequisites==
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/105845"

Navigation menu