Changes

Then press '''"O"''' on your keyboard. This will direct you to the main settings menu. From there you should specify the name of the serial device and the same parameters that you entered in the router's configuration. A picture with corresponding parameters is presented below:

Then press '''"O"''' on your keyboard. This will direct you to the main settings menu. From there you should specify the name of the serial device and the same parameters that you entered in the router's configuration. A picture with corresponding parameters is presented below:

[[File:Minicom settings port v2.png|border|center|class=tlt-border|757×468px]]

[[File:Minicom settings port v3.png|border|center|class=tlt-border|757×468px]]

Once done, press '''"Enter"'''. In the next menu, you can save these settings as defaults by selecting '''Save setup as dfl''' so that you would not need to set everything up the next time you use the console.

Once done, press '''"Enter"'''. In the next menu, you can save these settings as defaults by selecting '''Save setup as dfl''' so that you would not need to set everything up the next time you use the console.