59
edits
Changes
correction
==Bridge Configuration ==
==Bridge Configuration ==
ZeroTier bridge configuration will allow two (or more) LAN's in the same ZeroTier network to be interconnected. For this exampl,e we will use two RUTX routers. Both of these routers should already havettheZ eroTier package installed and be connected to the ZeroTier Portal.
ZeroTier bridge configuration will allow two (or more) LAN's in the same ZeroTier network to be interconnected. For this example, we will use two RUTX routers. Both of these routers should already have the ZeroTier package installed and be connected to the ZeroTier Portal.
===First router===
===First router===
----
----
*Navigate to '''''Services → VPN → Zerotier''''' → and access the ZeroTier instance, aconfiguringit the same way as the first router.
*Navigate to '''''Services → VPN → Zerotier''''' → and access the ZeroTier instance, configuring it the same way as the first router.
* Navigate to '''''Network → LAN → General settings''''' and change the '''IPv4 address''' to an IP that is in the same subnet as the first router (We will use 192.168.1.2 for this example)
* Navigate to '''''Network → LAN → General settings''''' and change the '''IPv4 address''' to an IP that is in the same subnet as the first router (We will use 192.168.1.2 for this example)
*Navigate to '''''Network → Interfaces → LAN → DHCP Server''''' and Disable '''DHCP server''' option
*Navigate to '''''Network → Interfaces → LAN → DHCP Server''''' and Disable '''DHCP server''' option
*'''NOTE: Make sure to remove any Managed IPs that might have stayed when the Auto-assigned feature was turned on ( By default, ZeroTier keeps it on).'''
*'''NOTE: Make sure to remove any Managed IPs that might have stayed when the Auto-assigned feature was turned on ( By default, ZeroTier keeps it on).'''
*In the '''Advanced section → Managed Routes,''' add the LAN network route (in this case, 192.168.1.0?/4), which ensures communication within the bridge. This allows devices in the ZeroTier network to communicate with devices on the local LAN.
*In the '''Advanced section → Managed Routes,''' add the LAN network route (in this case, 192.168.1.0?/4), which ensures communication within the bridge. This allows devices in the ZeroTier network to communicate with devices on the LAN.
[[File:Managed Routes.png||500×200]]
[[File:Managed Routes.png||500×200]]