Changes

RUTOS Software Development Kit (SDK) Instruction (view source)

Revision as of 08:29, 16 November 2023

143 bytes added , 08:29, 16 November 2023

no edit summary

Line 85: Line 85:

sudo apt install nodejs

−

sudo apt install npm

+

sudo apt install npm *v12.22.9*

sudo apt install build-essential ccache ecj fastjar file flex g++ gawk \ gettext git java-propose-classpath java-wrappers jq libelf-dev \ libffi-dev libncurses5-dev libncursesw5-dev libssl-dev libtool \ python python2.7-dev python3 python3-dev python3-distutils \ python3-setuptools rsync subversion swig time u-boot-tools \ unzip wget xsltproc zlib1g-dev bison

Line 154: Line 154:

[[File:PASSWORD.png|border|class=tlt-border]]

−

Change "admin01" to your password on line [ -z "$passwd" ] && passwd="$(mkpasswd

+

Change "'''admin01'''" to your password on line '''[ -z "$passwd" ] && passwd="$(mkpasswd

−

admin01)"

+

admin01)"'''

After making changes and saving them to the directory, we may '''build compile''' using the following commands:

Line 163: Line 163:

make clean

−

Following that, we must execute the "nproc" command to determine the number of processors, and it will return a number, such as 1, allowing us to run command. ~~“make~~ -j1 V=~~sc”~~ for verbose output. This way you will see more logs that may help to troubleshoot compilation issues.

+

Following that, we must execute the "'''nproc'''" command to determine the number of processors, and it will return a number, such as 1, allowing us to run command. “'''make -j1 V=sc'''” for verbose output. This way you will see more logs that may help to troubleshoot compilation issues.

−

The firmware can then be found in the directory listed below *Depends on the target*:

+

The firmware can then be found in the directory listed below '''*Depends on the target*''':

rutos-ath79-rut9-gpl>bin>targets>ath79>generic>tltFws>RUTX_R_GPL_00.07.05.3_WEBUI

'''file name''': RUTX_R_GPL_00.07.05.X_WEBUI

Line 179: Line 179:

[[File:IP1.png|border|class=tlt-border]]

−

You will then be presented with the option to modify the Default IP address, allowing you to input your desired value. By default, it is set to '''(192.168.1.1)'''.

+

You will then be presented with the option to modify the '''Default IP address''', allowing you to input your desired value. By default, it is set to '''(192.168.1.1)'''.

[[File:IP2.png|border|class=tlt-border]]

Line 186: Line 186:

[[File:IP3.png|border|class=tlt-border]]

−

After making the desired changes to the Default IP address, you can then save those modifications.

+

After making the desired changes to the '''Default IP address''', you can then save those modifications.

[[File:IP4.png|border|class=tlt-border]]

Line 195: Line 195:

make clean

−

Following that, we must execute the "nproc" command to determine the number of processors, and it will return a number, such as 1, allowing us to run command. ~~“make~~ -j1 V=~~sc”~~ for verbose output. This way you will see more logs that may help to troubleshoot compilation issues.

+

Following that, we must execute the "'''nproc'''" command to determine the number of processors, and it will return a number, such as 1, allowing us to run command. “'''make -j1 V=sc'''” for verbose output. This way you will see more logs that may help to troubleshoot compilation issues.

−

The firmware can then be found in the directory listed below *Depends on the target*:

+

The firmware can then be found in the directory listed below '''*Depends on the target*''':

rutos-ath79-rut9-gpl>bin>targets>ath79>generic>tltFws>RUTX_R_GPL_00.07.05.3_WEBUI

'''file name''': RUTX_R_GPL_00.07.05.X_WEBUI

Line 220: Line 220:

make clean

−

Following that, we must execute the "nproc" command to determine the number of processors, and it will return a number, such as 1, allowing us to run command. ~~“make~~ -j1 V=~~sc”~~ for verbose output. This way you will see more logs that may help to troubleshoot compilation issues.

+

Following that, we must execute the "'''nproc'''" command to determine the number of processors, and it will return a number, such as 1, allowing us to run command. “'''make -j1 V=sc'''” for verbose output. This way you will see more logs that may help to troubleshoot compilation issues.

−

The firmware can then be found in the directory listed below *Depends on the target*:

+

The firmware can then be found in the directory listed below '''*Depends on the target*''':

rutos-ath79-rut9-gpl>bin>targets>ath79>generic>tltFws>RUTX_R_GPL_00.07.05.3_WEBUI

'''file name''': RUTX_R_GPL_00.07.05.X_WEBUI

Line 249: Line 249:

make clean

−

Following that, we must execute the "nproc" command to determine the number of processors, and it will return a number, such as 1, allowing us to run command. ~~“make~~ -j1 V=~~sc”~~ for verbose output. This way you will see more logs that may help to troubleshoot compilation issues.

+

Following that, we must execute the "'''nproc'''" command to determine the number of processors, and it will return a number, such as 1, allowing us to run command. “'''make -j1 V=sc'''” for verbose output. This way you will see more logs that may help to troubleshoot compilation issues.

−

The firmware can then be found in the directory listed below *Depends on the target*:

+

The firmware can then be found in the directory listed below '''*Depends on the target*''':

rutos-ath79-rut9-gpl>bin>targets>ath79>generic>tltFws>RUTX_R_GPL_00.07.05.3_WEBUI

'''file name''': RUTX_R_GPL_00.07.05.X_WEBUI

Line 287: Line 287:

make clean

−

Following that, we must execute the "nproc" command to determine the number of processors, and it will return a number, such as 1, allowing us to run command. ~~“make~~ -j1 V=~~sc”~~ for verbose output. This way you will see more logs that may help to troubleshoot compilation issues.

+

Following that, we must execute the "'''nproc'''" command to determine the number of processors, and it will return a number, such as 1, allowing us to run command. “'''make -j1 V=sc'''” for verbose output. This way you will see more logs that may help to troubleshoot compilation issues.

−

The firmware can then be found in the directory listed below *Depends on the target*:

+

The firmware can then be found in the directory listed below '''*Depends on the target*''':

rutos-ath79-rut9-gpl>bin>targets>ath79>generic>tltFws>RUTX_R_GPL_00.07.05.3_WEBUI

'''file name''': RUTX_R_GPL_00.07.05.X_WEBUI

Line 323: Line 323:

make clean

−

Following that, we must execute the "nproc" command to determine the number of processors, and it will return a number, such as 1, allowing us to run command. ~~“make~~ -j1 V=~~sc”~~ for verbose output. This way you will see more logs that may help to troubleshoot compilation issues.

+

Following that, we must execute the "'''nproc'''" command to determine the number of processors, and it will return a number, such as 1, allowing us to run command. “'''make -j1 V=sc'''” for verbose output. This way you will see more logs that may help to troubleshoot compilation issues.

−

The firmware can then be found in the directory listed below *Depends on the target*:

+

The firmware can then be found in the directory listed below '''*Depends on the target*''':

rutos-ath79-rut9-gpl>bin>targets>ath79>generic>tltFws>RUTX_R_GPL_00.07.05.3_WEBUI

'''file name''': RUTX_R_GPL_00.07.05.X_WEBUI

LoayA

Administrators

90

edits

Namespaces

Variants

Views

More

Search

Changes

RUTOS Software Development Kit (SDK) Instruction (view source)

Revision as of 08:29, 16 November 2023

Navigation menu

Personal tools

NAVIGATION

Tools

Categories