Line 40: |
Line 40: |
| | | |
| On popped up window select these options: | | On popped up window select these options: |
− | [[File:BGP peer config v1.png|none|border|left|class=tlt-border]] | + | [[File:BGP peer config v1.png|none|border|left|class=tlt-border|800x800px]] |
| | | |
|  1. <b>Enable</b> - on | |  1. <b>Enable</b> - on |
Line 48: |
Line 48: |
|  3. <b>Remote address</b> - 10.10.10.20 (RUT2 WAN IP) | |  3. <b>Remote address</b> - 10.10.10.20 (RUT2 WAN IP) |
| ==RUT2 BGP Configuration== | | ==RUT2 BGP Configuration== |
− | For RUT2 configuration is very similar all we need to do is just change <b>BGP router ID</b> to <b>10.10.10.20</b>, <b>Network</b> to <b>192.168.2.0/24</b> on <b>BGP Instance</b> and <b>Remote address</b> to <b>10.10.10.10</b> on <b>Peer Configuration</b>. | + | For RUT2, the configuration is very similar, all we need to do is just change the <b>BGP router ID</b> to <b>10.10.10.20</b>, <b>Network</b> to <b>192.168.2.0/24</b> on the <b>BGP Instance</b>, and the <b>Remote address</b> to <b>10.10.10.10</b> on the <b>Peer Configuration</b>. |
| | | |
| <b>BGP Instance</b> should look like this: | | <b>BGP Instance</b> should look like this: |
Line 61: |
Line 61: |
| Now we can reach only routers by them self to reach their whole network we need to edit Firewalls <b>WAN</b> Zone to add <b>lan</b> on <b>forward to destination zones</b> field. | | Now we can reach only routers by them self to reach their whole network we need to edit Firewalls <b>WAN</b> Zone to add <b>lan</b> on <b>forward to destination zones</b> field. |
| | | |
− | On both routers navgate to <b>Network -> Firewall -> General Settings -> Zones</b> and press edit on <b>wan</b> zone. | + | On both routers navigate to <b>Network -> Firewall -> General Settings -> Zones</b> and press edit on <b>wan</b> zone. |
| | | |
− | [[File:BGP Firewall edit.png|none|border|left|class=tlt-border]] | + | [[File:BGP Firewall edit.png|none|border|left|class=tlt-border|1100x1100px]] |
| | | |
− | On popped up window add <b>lan</b> on <b>Allow forward to destination zones</b> field. | + | On popped up window add <b>lan</b> on <b>Allow forward to destination zones</b> field and press |
| | | |
− | [[File:BGP Firewall WAN zone .png|none|border|left|class=tlt-border]] | + | [[File:BGP Firewall WAN zone .png|none|border|left|class=tlt-border|900x900px]] |
| | | |
| =Testing the setup= | | =Testing the setup= |
− | If you have followed the steps correctly, configuration should be complete. Here are the results you can expect to receive: | + | If you have followed the steps correctly, the configuration should be complete. Here are the results you can expect to receive: |
| | | |
| PC1 to PC2: | | PC1 to PC2: |
Line 90: |
Line 90: |
| =See also= | | =See also= |
| <ul> | | <ul> |
− | <li></li>
| |
| <li>[[Routing]]</li> | | <li>[[Routing]]</li> |
| + | <li>[[Firewall traffic rules]]</li> |
| </ul> | | </ul> |
− |
| |
| | | |
| =External links= | | =External links= |
| | | |
| https://frrouting.org/ - additional information about FRRouting that our device routing is based on. | | https://frrouting.org/ - additional information about FRRouting that our device routing is based on. |