92
edits
Changes
IPSec Tunnel w/CA Certs Configuration (view source)
Revision as of 23:04, 1 July 2024
, Monday at 23:04no edit summary
That each RUT device can ping the other's LAN IP. In this case 192.168.3.1 for RUT1 & 192.168.14.1 for RUT2.
That each RUT device can ping the other's LAN IP. In this case 192.168.3.1 for RUT1 & 192.168.14.1 for RUT2.
And that LAN device on RUT1 can ping LAN device on RUT2.
And that LAN device on RUT1 can ping LAN device on RUT2.
[[File:RUT END-To END Example Image.png|frame|none]]
The figure above depicts two RUTxxx routers (RUT1 and RUT2) connected by an IPsec tunnel via their WAN interfaces. Where each RUT router has a LAN device connected that has received a DHCP address.
* First make sure each device has been rebooted at least once after you have finished configuring the previous steps.
* First make sure each device has been rebooted at least once after you have finished configuring the previous steps.