Changes

After successfully installing the package and making the required configuration, you can add the device on Cloud of Things platform.   

After successfully installing the package and making the required configuration, you can add the device on Cloud of Things platform.   

[[File:cumiot.png]]

[[Image:Cloud of things adding device 1.png]]

[[File:cumiotwindow.png]]

[[Image:Cloud of things adding device 2.png]]

Only single field is required, which is Server Address. This is the same URL of Cumulocity Cockpit website. In this example, it is myservername.cumulocity.com.

Only single field is required, which is Server Address. This is the same URL of Cumulocity Cockpit website. In this example, it is myservername.cumulocity.com.

Also click „Enable“ to enable example application. See below:

Also click „Enable“ to enable example application. See below:

[[File:cumiotvalues.png]]

[[Image:Cloud of things adding device 3.png]]

Now click „Save“ and if everything is correct – example application will successfully connect to the Cumulocity server.

Now click „Save“ and if everything is correct – example application will successfully connect to the Cumulocity server.

Device registration is done by writing down device's serial number. In order to obtain your device's serial number, look at the backplate of it or navigate to your device's control panel and then to „Status → Device“ page:

Device registration is done by writing down device's serial number. In order to obtain your device's serial number, look at the backplate of it or navigate to your device's control panel and then to „Status → Device“ page:

[[File:cumdevice.png]]

[[Image:Cloud of things adding device 4.png]]

In this case, serial number is 09516845.

In this case, serial number is 09516845.

Go to the Device Management page:

Go to the Device Management page:

[[File:cumcockpit.png]]

[[Image:Cloud of things adding device 5.png]]

[[File:cumdevicemanagement.png]]

[[Image:Cloud of things adding device 6.png]]

Then navigate to Registration page:

Then navigate to Registration page:

[[File:cumdevicepage.png]]

[[Image:Cloud of things adding device 7.png]]

Click „Register device“:

Click „Register device“:

[[File:cumdeviceregister.png]]

[[Image:Cloud of things adding device 8.png]]

Click „General device registration“:

Click „General device registration“:

[[File:cumnewdevice.png]]

[[Image:Cloud of things adding device 9.png]]

Write device’s serial number in „Device ID“ field and click „Next“:

Write device’s serial number in „Device ID“ field and click „Next“: