108
edits
Changes
Setting up iptv using rutxx router template (view source)
Revision as of 17:22, 7 April 2020
, 17:22, 7 April 2020no edit summary
After login in to your router, you need to set up your <b>WAN</b>. To find <b>WAN</b> configuration, you need to navigate to “Network→WAN”. You should see a web page like in the picture below.
After login in to your router, you need to set up your <b>WAN</b>. To find <b>WAN</b> configuration, you need to navigate to “Network→WAN”. You should see a web page like in the picture below.
[[File:rutx_wan_settings_page_v1.jpg|border|class=tlt-border]]
[[File:{{{wan_settings_page}}}|border|class=tlt-border]]
How to set up your <b>WAN</b> configuration can be found [[RUTX10_WAN|here]].
How to set up your <b>WAN</b> configuration can be found [[RUTX10_WAN|here]].
When <b>WAN</b> configuration is done, it’s time to configure VLAN’s. VLAN configuration can be found by navigating to “Network→VLAN”. You should see a page like in the picture below.
When <b>WAN</b> configuration is done, it’s time to configure VLAN’s. VLAN configuration can be found by navigating to “Network→VLAN”. You should see a page like in the picture below.
[[File:rutx_vlan_settings_page_v1.jpg|border|class=tlt-border]]
[[File:{{{vlan_settings_page}}}|border|class=tlt-border]]
----
----
Now press the “ADD” button, which is located in the “VLANS ON SWITCH0” section.
Now press the “ADD” button, which is located in the “VLANS ON SWITCH0” section.
[[File:rutx_add_vlan_section_v1.png|border|class=tlt-border]]
[[File:{{{vlan_section_add}}}|border|class=tlt-border]]
A new row should appear in the “VLANS ON SWITCH0” section.
A new row should appear in the “VLANS ON SWITCH0” section.
[[File:Rutx_vlan_switch_section_before_v1.jpg|border|class=tlt-border]]
[[File:{{{vlan_section_configuration}}}|border|class=tlt-border]]
----
----
<li>Change your desired LAN port to "untagged"</li>
<li>Change your desired LAN port to "untagged"</li>
<li>Change WAN port to "tagged"</li>
<li>Change WAN port to "tagged"</li>
</ol>[[File:rutx_vlan_switch_section_after_v1.jpg|border|class=tlt-border]]
</ol>[[File:{{{vlan_section_configurated}}}|border|class=tlt-border]]
</li>
</li>
After configuring VLAN, the desired port does not have an IP address because now that port is using a new interface which has no configuration yet. You can configure the interface through LAN configuration page. The <b>LAN</b> configuration page can be found by navigating to “Network→LAN”.
After configuring VLAN, the desired port does not have an IP address because now that port is using a new interface which has no configuration yet. You can configure the interface through LAN configuration page. The <b>LAN</b> configuration page can be found by navigating to “Network→LAN”.
[[File:rutx_lan_settings_page_before_v1.jpg|border|class=tlt-border]]
[[File:{{{lan_settings_page}}}|border|class=tlt-border]]
----
----
<li>Now lets add an interface for the new added VLAN:
<li>Now lets add an interface for the new added VLAN:
<li>Select the new created interface from the interface list. It should be named like this '''eth0.<VLAN_ID>'''</li>
<li>Select the new created interface from the interface list. It should be named like this '''eth0.<VLAN_ID>'''</li>
<li>Click the "<b>ADD</b>" button</li>
<li>Click the "<b>ADD</b>" button</li>
</ol>[[File:rutx_add_lan_interface_v1.jpg|border|class=tlt-border]]
</ol>[[File:{{{lan_add_interface}}}|border|class=tlt-border]]
</li>
</li>
----
----
<ol>
<ol>
<li>Click the "<b>SWITCH PROTOCOL</b>" button</li>
<li>Click the "<b>SWITCH PROTOCOL</b>" button</li>
</ol>[[File:rutx_switch_lan_protocol_v1.jpg|border|class=tlt-border]]
</ol>[[File:{{{lan_switch_protocol}}}|border|class=tlt-border]]
</li>
</li>
----
----
<li>Select the necessary netmask for your subnet</li>
<li>Select the necessary netmask for your subnet</li>
<li>Enable DHCP server</li>
<li>Enable DHCP server</li>
</ol>[[File:rutx_configure_lan_interface_v1.jpg|border|class=tlt-border]]
</ol>[[File:{{{lan_interface_configuration}}}|border|class=tlt-border]]
</li>
</li>
After changing the values press the "'''SAVE & APPLY'''" button for our configuration to take effect.
After changing the values press the "'''SAVE & APPLY'''" button for our configuration to take effect.
After saving the configuration, you should be redirected to main <b>LAN</b> page.
After saving the configuration, you should be redirected to main <b>LAN</b> page.
[[File:rutx_lan_settings_after_v1.jpg|border|class=tlt-border]]
[[File:{{{lan_interface_configurated}}}|border|class=tlt-border]]
If you need a more detailed explanation about LANs, you can find it [[RUTX10_LAN|here]].
If you need a more detailed explanation about LANs, you can find it [[RUTX10_LAN|here]].
