1,108
edits
Changes
→Set up hotspot
If you have already set up your wireless access point - skip this step.
If you have already set up your wireless access point - skip this step.
* Login to your router's WebUI. You can do this by entering the router's LAN IP address (192.168.1.1 by default) into the URL field of your web browser.
[[File:NewAP.png|border|center|1278x1278px]]
* Go to the '''Network → Wireless''' page.
* '''Click 'Add'''' to create a new Wireless Access Point. Depending on your needs, choose a 2.4 GHz ('''1''') or 5 GHz ('''2''') Access Point.[[File:Wifia.png|border|center]]
After it you will be prompt to edit a new wireless access point. In the '''General Setup''' tab select:
After it you will be prompt to edit a new wireless access point. In the '''General Setup''' tab select:
===Set up hotspot===
===Set up hotspot===
Navigate to '''''Services''' → '''Hotspot''''' and add a new Hotspot Instance. To do so, find the '''Add New Instance''' section and select your Wireless AP in the interface list, then press Add.
[[File:Hotspotconfig1.png|border|center]]
[[File:Hotspotconfig1.png|border|center]]
'''Hotspot configuration'''
'''Hotspot configuration'''
In the '''General tab''' do the following steps:
Check '''enable''' box
# Check '''Enable;'''
# Authentication mode - '''Radius'''.
[[File:Hotspotconfig2.png|border|center]]
Then go to '''Radius''' tab and enter the configuration details from cobot:
# '''RADIUS Servers''' - 130.211.138.166, 104.198.250.153;
# '''Authentication port''' - 13143;
# '''Radius secret key''' - 4L1pnC5jMIlfZH2T;
# '''Save & Apply'''.
[[File:Hotspotconfiga.png|border|center|1258x1258px]]
[[File:Hotspotconfigq.png|border|center]]
==Test your Hotspot==
==Test your Hotspot==
