510
edits
Changes
Data transfer from Modbus TCP to Modbus RTU Gateway (view source)
Revision as of 09:16, 9 November 2022
, 09:16, 9 November 2022→Configuring the router
* In the configuration section, press '''Enable''' to enable the serial interface.
* In the configuration section, press '''Enable''' to enable the serial interface.
* In the Serial '''Type''' section, select '''Modbus gateway'''.
* In the Serial '''Type''' section, select '''Modbus gateway'''.
You may need to change configuration depending on your needs, just make sure that identical settings are set here and in RTU simulator: Baud rate, data bits, parity, stop bits, flow control.
[[File:Navigateandenable.png|border|class=tlt-border]]
[[File:Navigateandenable.png|border|class=tlt-border]]
