489
edits
Changes
Load Balancing Rules/Policies examples (view source)
Revision as of 11:31, 13 December 2022
, 11:31, 13 December 2022no edit summary
In this section, we will configure a device unlike '''RUTX12''' with one modem. We will configure all of the traffic from the '''LAN1''' port to go through '''SIM1''' and all of the traffic from the '''LAN2''' port will go through WiFi WAN (you can use regular Wired WAN instead).
In this section, we will configure a device unlike '''RUTX12''' with one modem. We will configure all of the traffic from the '''LAN1''' port to go through '''SIM1''' and all of the traffic from the '''LAN2''' port will go through WiFi WAN (you can use regular Wired WAN instead).
Once again we will start the configuration by '''configuring''' '''LAN2''' port traffic, keep in mind that the '''LAN2''' port is configurated as VLAN 192.168.3.0/24.
Once again we will start the configuration by '''configuring''' '''LAN2''' port traffic, keep in mind that the '''LAN2''' port is configurated as '''VLAN 192.168.3.0/24'''.
----
===LAN2 configuration===
===LAN2 configuration===