Changes

==I/O control via Public IP and HTTP==

==I/O control via Public IP and HTTP==

For this configuration you will need a Static or Dynamic Public IP address on RUT2. You can read up more on this in our article on [[Private_and_Public_IP_Addresses|Private and Public IP Addresses.]] Action will execute a script that contains a curl -X command which will change RUT2 Output state to a high via RUT2 Public IP.  

For this configuration, you will need a Static or Dynamic Public IP address on RUT2. You can read up more on this in our article on [[Private_and_Public_IP_Addresses|Private and Public IP Addresses.]] The action will run a script or HTTP and execute the POST/GET command that will set the RUT2 output state to "high" using the RUT2 public IP.  

===RUT 2===

===RUT 2===