RUT260 Power Consumption: Difference between revisions
m (Vainius.l moved page Draft:RUT260 Power Consumption to RUT260 Power Consumption without leaving a redirect) |
No edit summary |
||
| Line 101: | Line 101: | ||
<small><sup><small>4</small></sup> - USB device with ~ 300 mA current draw. </small> <br> | <small><sup><small>4</small></sup> - USB device with ~ 300 mA current draw. </small> <br> | ||
<small>Power consumption may differ due to mobile data transmission speed, testing environment and conditions.</small> | <small>Power consumption may differ due to mobile data transmission speed, testing environment and conditions.</small> | ||
[[Category:RUT260 Manual]] | |||
Revision as of 10:44, 6 September 2023
Main Page > RUT Routers > RUT260 > RUT260 Manual > RUT260 Power ConsumptionRUT906 power consumption values in different states of operation are represented in the table(s) below:
| Test type | ||
|---|---|---|
| Idle, no SIM card inserted (9 V) | ||
| Idle, no SIM card inserted (12 V) | ||
| Idle, no SIM card inserted (24 V) |
| Test type | ||
|---|---|---|
| Idle + mobile data on 1 (9 V) | ||
| Idle + mobile data on 1 (12 V) | ||
| Idle + mobile data on 1 (24 V) |
| Test type | ||
|---|---|---|
| Mobile data on 1 + 1 LAN device connected 2 (9 V) | ||
| Mobile data on 1 + 1 LAN device connected 2 (12 V) | ||
| Mobile data on 1 + 1 LAN device connected 2 (24 V) |
| Test type | ||
|---|---|---|
| Max speed LTE transmission + 4 LAN devices connected 2 + high CPU load 3 + data transfer via WiFi + devices connected to RS485 and RS232 + GPS on + USB device connected 4 + all outputs enabled on I/O panel (9 V) |
||
| Max speed LTE transmission + 4 LAN devices connected 2 + high CPU load 3 + data transfer via WiFi + devices connected to RS485 and RS232 + GPS on + USB device connected 4 + all outputs enabled on I/O panel (12 V) |
||
| Max speed LTE transmission + 4 LAN devices connected 2 + high CPU load 3 + data transfer via WiFi + devices connected to RS485 and RS232 + GPS on + USB device connected 4 + all outputs enabled on I/O panel (24 V) |
1 - Only mobile data connection established with no additional traffic.
2 - Data streams between RUT906 and other connected LAN devices created using iPerf.
3 - Load created using md5sum (calculation and verification of 128-bit MD5 hashes).
4 - USB device with ~ 300 mA current draw.
Power consumption may differ due to mobile data transmission speed, testing environment and conditions.